STM32W108HBU6 STMicroelectronics, STM32W108HBU6 Datasheet - Page 114

• Manufacturer Part Number: STM32W108HBU6
• Manufacturer: STMicroelectronics

Specifications of STM32W108HBU6

• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Processing Unit: Microprocessor
• Operating Supply Voltage (min): 1.18V
• Operating Supply Voltage (typ): 1.25V
• Operating Supply Voltage (max): 1.32V
• Package Type: VFQFPN EP
• Pin Count: 40
• Mounting: Surface Mount
• Rad Hardened: No
• Lead Free Status / Rohs Status: Supplier Unconfirmed

General-purpose timers
10.1.3
114/208
Clock selection
The counter clock can be provided by the following clock sources:
●
●
●
●
Internal clock source (CK_INT)
The internal clock is selected when the slave mode controller is disabled (TIM_SMS = 000 in
the TIMx_SMCR register). In this mode, the TIM_CEN, TIM_DIR (in the TIMx_CR1
register), and TIM_UG bits (in the TIMx_EGR register) are actual control bits and can be
changed only by software, except for TIM_UG, which remains cleared automatically. As
soon as the TIM_CEN bit is written to 1, the prescaler is clocked by the internal clock
CK_INT.
Figure 25
without prescaling.
Figure 25. Control circuit in Normal mode, internal clock divided by 1
External clock source mode 1
This mode is selected when TIM_SMS = 111 in the TIMx_SMCR register. The counter can
count at each rising or falling edge on a selected input.
Internal clock (PCLK)
External clock mode 1: external input pin (TIy)
External clock mode 2: external trigger input (ETR)
Internal trigger input (ITR0): using the other timer as prescaler. Refer to the
timer as prescaler for the other timer
shows the behavior of the control circuit and the up-counter in normal mode,
Doc ID 16252 Rev 7
for more details.
STM32W108CB, STM32W108HB
Using one