EP2AGX190FF35C6N Altera, EP2AGX190FF35C6N Datasheet - Page 90

• Manufacturer Part Number: EP2AGX190FF35C6N
• Description: IC ARRIA II GX 190K 1152FBGA
• Manufacturer: Altera
• Series: Arria II GXr

Specifications of EP2AGX190FF35C6N

• Number Of Logic Elements/cells: 181165
• Number Of Labs/clbs: 7612
• Total Ram Bits: 9939
• Number Of I /o: 612
• Voltage - Supply: 0.87 V ~ 0.93 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1152-FBGA
• Family Name: Arria® II GX
• Number Of Logic Blocks/elements: 190300
• # I/os (max): 612
• Frequency (max): 400MHz
• Operating Supply Voltage (typ): 900mV
• Logic Cells: 190300
• Ram Bits: 10380902.4
• Operating Supply Voltage (min): 0.87V
• Operating Supply Voltage (max): 0.93V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1152
• Package Type: FC-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant

4–30
DSP Block Control Signals
Table 4–9. DSP Block Dynamic Signals for DSP Block (Part 1 of 2)
Arria II GX Device Handbook, Volume 1
DSP Block Dynamic Signals per Half-DSP Block
signa
signb
output_round
chainout_round
output_saturate
Signal Name
You can use the rounding and saturation function as described in regular supported
multiplication operations shown in
type operations, the following convention is used.
The functionality of the round logic unit is in the format of:
Result = RND[
Likewise, the functionality of the saturation logic unit is in the format of:
Result = SAT[
If both the round and saturation logic units are used for an accumulation type of
operation, the format is:
Result = SAT[RND[
The Arria II GX DSP block is configured using a set of static and dynamic signals. At
run time, you can configure the DSP block dynamic signals to toggled or not.
Table 4–9
Signed/unsigned control for all multipliers and adders.
signa for “multiplicand” input bus to dataa[17:0] each
multiplier.
signb for “multiplier” input bus datab[17:0] to each multiplier.
■
■
■
■
Round control for first stage round/saturation block.
■
■
Round control for second stage round/saturation block.
■
■
Saturation control for first stage round/saturation block for Q-format
multiply. If both rounding and saturation is enabled, saturation is done
on the rounded result.
■
■
shows a list of dynamic signals for the DSP block.
signa = 1, signb = 1 for signed-signed multiplication
signa = 1, signb = 0 for signed-unsigned multiplication
signa = 0, signb = 1 for unsigned-signed multiplication
signa = 0, signb = 0 for unsigned-unsigned multiplication
output_round = 1 for rounding on multiply output
output_round = 0 for normal multiply output
chainout_round = 1 for rounding on multiply output
chainout_round = 0 for normal multiply output
output_saturate = 1 for saturation support
output_saturate = 0 for no saturation support


(A × B)], when used for an accumulation type of operation.
(A × B)], when used for an accumulation type of operation.

(A × B)]]
Function
Table 4–2 on page
Chapter 4: DSP Blocks in Arria II GX Devices
4–5. However, for accumulation
© July 2010 Altera Corporation
Operational Mode Descriptions
Count
2
1
1
1