KIT_TC1797_SK Infineon Technologies, KIT_TC1797_SK Datasheet - Page 147

• Manufacturer Part Number: KIT_TC1797_SK
• Description: KIT STARTER AUDO FUTURE TC1797
• Manufacturer: Infineon Technologies
• Series: Audo Futurer
• Type: MCUr

Specifications of KIT_TC1797_SK

• Contents: Board, Adapters, Cables, CD, Power Supply
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: TC1797
• Other names: KITTC1797SKIN

Table 13
Parameter
Conversion time
Converter Clock
Input resistance of
the analog voltage
path (Rn, Rp)
Channel Amplifier
Cutoff Frequency
Settling Time of a
Channel Amplifier
after changing ENN
or ENP
1) Calibration should be performed at each power-up. In case of continuous operation, calibration should be
2) The offset error voltage drifts over the whole temperature range maximum ±6 LSB.
3) Applies when the gain of the channel equals one. For the other gain settings, the offset error increases; it must
4) Voltage overshoots up to 4 V are permissible, provided the pulse duration is less than 100 µs and the
5) Voltage overshoots up to 1.7 V are permissible, provided the pulse duration is less than 100 µs and the
6) A running conversion may become inexact in case of violating the normal operating conditions (voltage
7) Current peaks of up to 40 mA with a duration of max. 2 ns may occur
8) This value applies in power-down mode.
9) Not subject to production test, verified by design / characterization.
The calibration procedure should run after each power-up, when all power supply
voltages and the reference voltage have stabilized. The offset calibration must run first,
followed by the gain calibration.
Data Sheet
performed minimum once per week, or on regular basis in order to compensate for temperature changes.
be multiplied with the applied gain.
cumulated summary of the pulses does not exceed 1 h.
cumulated sum of the pulses does not exceed 1 h.
overshoots).
9)
FADC Characteristics (Operating Conditions apply) (cont’d)
9)
Symbol
t
f
R
f
t
C
FADC
COFF
SET
FAIN
CC
CC
SR –
CC –
CC –
Min.
100
2
143
Values
Typ. Max.
–
–
–
–
–
21
90
200
–
5
Unit
CLK
of
MHz
kΩ
MHz
µs
f
ADC
Electrical Parameters
Note /
Test Condition
For 10-bit conv.
–
9)
–
–
V1.1, 2009-04
TC1797