IDT82P2821BHG IDT, Integrated Device Technology Inc, IDT82P2821BHG Datasheet - Page 105

• Manufacturer Part Number: IDT82P2821BHG
• Description: IC LINE INTERFACE UNIT 640-PBGA
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT82P2821BHG

• Function: Line Interface Unit (LIU)
• Interface: E1, J1, T1
• Number Of Circuits: 1
• Voltage - Supply: 1.8V, 3.3V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: *
• Includes: Defect and Alarm Detection, Driver Over-Current Detection and Protection, LLOS Detection, PRBSARB / IB Detection and Generation
• Number Of Transceivers: 1
• Screening Level: Industrial
• Mounting: Surface Mount
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Supply: -
• Power (watts): -
• Lead Free Status / RoHS Status: Compliant, Lead free / RoHS Compliant
• Other names: 800-1703; 82P2821BHG

LOOP - Loopback Control Register
Address: 019H, 059H, 099H, 0D9H, 119H, 159H, 199H, 1D9H, (CH1~CH8)
Type: Read / Write
Default Value: 00H
Programming Information
IDT82P2821
7 - 4
Bit
3
2
1
0
219H, 259H, 299H, 2D9H, 319H, 359H, 399H, 3D9H, (CH9~CH16)
419H, 459H, 499H, 4D9H, 519H, (CH17~CH21)
7D9H (CH0)
7
-
AUTOLP
Name
DLP
RLP
ALP
-
6
-
Reserved.
This bit determines whether automatic Digital/Remote Loopback is enabled.
0: Automatic Digital/Remote Loopback is disabled. (default)
1: Automatic Digital/Remote Loopback is enabled. The corresponding channel will enter Digital/Remote Loopback when the acti-
vate IB code is detected in the transmit/receive path for more than 5.1 sec.; and will return from Digital/Remote Loopback when
the deactivate IB code is detected in the transmit/receive path for more than 5.1 sec.
This bit controls whether Digital Loopback is enabled.
0: Disable. (default)
1: Enable.
This bit controls whether Remote Loopback is enabled.
0: Disable. (default)
1: Enable.
This bit controls whether Analog Loopback is enabled.
0: Disable. (default)
1: Enable.
5
-
4
-
21(+1) CHANNEL HIGH-DENSITY T1/E1/J1 LINE INTERFACE UNIT
105
AUTOLP
3
Description
DLP
2
RLP
1
February 6, 2009
ALP
0