MC56F8366 Freescale Semiconductor, Inc, MC56F8366 Datasheet - Page 143

• Manufacturer Part Number: MC56F8366
• Description: 56f8300 16-bit Digital Signal Controllers
• Manufacturer: Freescale Semiconductor, Inc

Part 10 Specifications
10.1 General Characteristics
The 56F8366/56F8166 are fabricated in high-density CMOS with 5V-tolerant TTL-compatible digital
inputs. The term “5V-tolerant” refers to the capability of an I/O pin, built on a 3.3V-compatible process
technology, to withstand a voltage up to 5.5V without damaging the device. Many systems have a mixture
of devices designed for 3.3V and 5V power supplies. In such systems, a bus may carry both 3.3V- and
5V-compatible I/O voltage levels (a standard 3.3V I/O is designed to receive a maximum voltage of 3.3V
± 10% during normal operation without causing damage). This 5V-tolerant capability therefore offers the
power savings of 3.3V I/O levels combined with the ability to receive 5V levels without damage.
Absolute maximum ratings in
is not guaranteed. Stress beyond these ratings may affect device reliability or cause permanent damage to
the device.
Note: All specifications meet both Automotive and Industrial requirements unless individual
Note: The 56F8166 device is guaranteed to 40MHz and specified to meet Industrial requirements only.
Freescale Semiconductor
Preliminary
specifications are listed.
This device contains protective circuitry to guard
against damage due to high static voltage or electrical
fields. However, normal precautions are advised to
avoid
maximum-rated voltages to this high-impedance circuit.
Reliability of operation is enhanced if unused inputs are
tied to an appropriate voltage level.
Table 10-1
application
56F8366 Technical Data, Rev. 6
are stress ratings only, and functional operation at the maximum
of
CAUTION
any
voltages
higher
than
General Characteristics
143