peb20532 Infineon Technologies Corporation, peb20532 Datasheet - Page 159

• Manufacturer Part Number: peb20532
• Description: 2 Channel Serial Optimized Communication Controller
• Manufacturer: Infineon Technologies Corporation

Data Sheet
CAS
TSCM
Carrier Detect Auto Start
CAS = ’0’
CAS = ’1’
Note: (1) In clock mode 1, 4 and 5 this bit must be set to ’0’.
Time Slot Control Mode
This bit controls internal counter operation in time slot oriented clock
mode 5:
TSCM=’0’
TSCM=’1’
(2) A receive clock must be provided for the autonomous receiver
control function of the CD input pin.
(3) In ASYNC mode the transmitter is additionally controlled by in-
band flow control mechanism (if enabled).
The CD pin is used as general input.
In clock mode 1, 4 and 5, clock mode specific control
signals must be provided at this pin (receive strobe,
receive gating RCG, frame sync clock FSC).
A pull-up/down resistor is recommended if unused.
The CD pin enables/disables the receiver for data
reception. (Polarity of CD pin can be configured via bit
’ICD’.)
The internal counter keeps running, restarting with zero
after being expired.
The internal counter stops at its maximum value and
restarts with the next frame sync pulse again.
5-159
Register Description (CCR1H)
PEB 20532
PEF 20532
(all modes)
(all modes)
2000-09-14