sak-c868p-1rr Infineon Technologies Corporation, sak-c868p-1rr Datasheet - Page 81

• Manufacturer Part Number: sak-c868p-1rr
• Description: 8 - Bit Cmos Microcontroller
• Manufacturer: Infineon Technologies Corporation

Figure 4-15
According to the desired capture/compare mode, the compare state bits have to be
switched. Therefore, an additional logic (see
event the compare state bits are modified. The mode selection (by bitfields MSEL6x in
register T12MSEL) enables the setting and the resetting of the compare state bits due
to compare actions of timer T12.
The HW modifications of the compare state bits is only possible while the timer T12 is
running. Therefore, the bit T12R is used to enable/disable the modification by HW.
For the hysteresis-like compare mode (MSEL6x=’1001’), the setting of the compare
state bit is only possible while the corresponding input CCPOSx=’1’ (inactive).
If the Hall Sensor mode (MSEL6x=’1000’) is selected, the compare state bits of the
compare channels 1 and 2 are modified by the timer T12 in order to indicate that a
programmed time has elapsed.
User’s Manual
CC6x_T12_xO
CC6x_T12_xO
T12_xST_se
(CC6xPS=0)
(CC6xPS=1)
T12_xST_re
compare
CC6xST
period
value
value
Compare States of Timer T12
0
compare state=0
passive
active
T12
4-37
=1
Figure
On-Chip Peripheral Components
passive
active
4-16) selects how and by which
=1
passive
active
=0
V 1.0, 2003-01
C868