c8051t617 Silicon Laboratories, c8051t617 Datasheet - Page 23

• Manufacturer Part Number: c8051t617
• Description: Mixed Signal Byte-programmable Eprom Mcu
• Manufacturer: Silicon Laboratories

C8051T610/1/2/3/4/5/6/7
1.3.
On-Chip Debug Circuitry
The C8051T61x devices include on-chip Silicon Labs 2-Wire (C2) debug circuitry that provides non-intru-
sive, full speed, in-circuit debugging of the production part installed in the end application.
Silicon Labs' debugging system supports inspection and modification of memory and registers, break-
points, and single stepping. No additional target RAM, program memory, timers, or communications chan-
nels are required. All the digital and analog peripherals are functional and work correctly while debugging.
All the peripherals (except for the ADC and SMBus) are stalled when the MCU is halted, during single
stepping, or at a breakpoint in order to keep them synchronized.
The C8051F31x Family of MCUs can be used to quickly develop code for a system using a device in the
C8051T61x family. The C8051F31x is a family of In-System Programmable, Flash-based devices that use
the same pinout as the C8051T61x devices, and can run code written for the C8051T61x. The
C8051T610DK development kit provides all the hardware and software necessary to develop application
code and perform in-circuit debugging for the C8051T610/1/2/3/4/5/6/7 MCUs. The kit includes software
with a developer's studio and debugger, an evaluation assembler/linker and ‘C’ compiler, and the neces-
sary cables for connection to the target board or the end-system. The development kit includes a 32-pin
LQFP Socket Daughter Card for programming 32-pin TQFP devices, samples of the C8051T610-GQ, and
a C8051F610 Emulation Daughter Card for rapid code development. An AC to DC wall adapter is supplied
for powering the board.
Rev. 0.3
23