mc9s12xf512 Freescale Semiconductor, Inc, mc9s12xf512 Datasheet - Page 774

• Manufacturer Part Number: mc9s12xf512
• Description: S12x Microcontrollers 16-bit Automotive Microcontroller
• Manufacturer: Freescale Semiconductor, Inc

Chapter 16 S12X Debug (S12XDBGV3) Module
16.3.2.7.4
Read: If COMRV[1:0] = 11
Write: Never
DBGMFR is visible at 0x0027 only with COMRV[1:0] = 11. It features four flag bits each mapped directly
to a channel. Should a match occur on the channel during the debug session, then the corresponding flag
is set and remains set until the next time the module is armed by writing to the ARM bit. Thus the contents
are retained after a debug session for evaluation purposes. These flags cannot be cleared by software, they
are cleared only when arming the module. A set flag does not inhibit the setting of other flags. Once a flag
is set, further triggers on the same channel have no affect.
16.3.2.8
Each comparator has a bank of registers that are visible through an 8-byte window in the S12XDBG
module register address map. Comparators A and C consist of 8 register bytes (3 address bus compare
registers, two data bus compare registers, two data bus mask registers and a control register).
Comparators B and D consist of four register bytes (three address bus compare registers and a control
register).
Each set of comparator registers is accessible in the same 8-byte window of the register address map and
can be accessed using the COMRV bits in the DBGC1 register. If the Comparators B or D are accessed
through the 8-byte window, then only the address and control bytes are visible, the 4 bytes associated with
data bus and data bus masking read as zero and cannot be written. Furthermore the control registers for
comparators B and D differ from those of comparators A and C.
774
Address: 0x0027
0x002C
0x002D
0x002A
0x002B
0x002E
0x002F
Reset
0x0028
0x0029
W
R
Comparator Register Descriptions
0
0
7
Debug Match Flag Register (DBGMFR)
DATA HIGH COMPARATOR
DATA LOW COMPARATOR
= Unimplemented or Reserved
ADDRESS MEDIUM
DATA HIGH MASK
DATA LOW MASK
ADDRESS HIGH
ADDRESS LOW
0
0
6
Figure 16-12. Debug Match Flag Register (DBGMFR)
CONTROL
MC9S12XF - Family Reference Manual, Rev.1.19
Table 16-27. Comparator Register Layout
0
0
5
0
0
4
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
MC3
0
3
MC2
0
2
Comparator A and C only
Comparator A and C only
Comparator A and C only
Comparator A and C only
Comparators A,B,C,D
Comparators A,B,C,D
Comparators A,B,C,D
Comparators A,B,C,D
Freescale Semiconductor
MC1
0
1
MC0
0
0