ak4566vn AKM Semiconductor, Inc., ak4566vn Datasheet - Page 23

no-image

ak4566vn

Manufacturer Part Number
ak4566vn
Description
20bit Stereo Codec With Built-in Ipga & Hp-amp
Manufacturer
AKM Semiconductor, Inc.
Datasheet
ASAHI KASEI
2) DAC
Power supply voltage for headphone amp is supplied from HVDD pin and centered around VCOM. Load resistance of
headphone output is min.20 . When PMHPL and PMHPR bit are “0”, headphone amplifiers are powered-down perfectly.
Then HPL and HPR pins are fixed to “L” (HVSS) and a capacitor of MUTET pin works to avoid pop noise.
(1) PDN pin should be set to “H” at least 150ns after the power is supplied.
(2) HPLMT, HPRMT and PMVCM bits should be changed to “1” after PDN pin goes to “H”.
(3) PMDAC, PMHPL, PMHPR bits should be changed to “1” and HPLMT, HPRMT bits should be changed to “0” after
(4) External clocks (MCLK, BICK, LRCK) are needed to operate DAC. When PMDAC= “0”, these clocks can be
(5) Rise time of headphone amp is determined by external capacitor of MUTET pin. When C=1µF,
(6) Fall time of headphone amp is determined by output capacitor for AC coupling. When C=100µF,
(7) Analog output corresponding to digital input has the group delay (GD) of 16.8/fs(=381µs@fs=44.1kHz).
(8) ATS bit sets transition time of digital attenuator. Default value is 1061/fs(=24ms@fs=44.1kHz).
(9) Power supply should be switched off after headphone amp is powered down (HPL/R pins become “L”).
REV 0.5
HPLMT, HPRMT, PMVCM bits are changed to “1”. Once PMHPL and PMHPR bits are changed to “1”, HPLMT
and HPRMT bits should be inverted from PMHPL and PMHPR bits respectively.
stopped. Headphone amp can operate without these clocks.
Power Supply
PDN pin
PMVCM bit
Clock Input
PMDAC bit
DAC Internal
SDTI pin
PMHPL/R bit
HPLMT,
ATTL/R7-0 bit
HPL/R pin
HPRMT bit
State
HP-amp
Don’t care
(1)
>150ns
00H(MUTE)
PD
(2) >0
Figure 18. Power-up/down sequence of DAC and HP-amp
Rise Time of Headphone Amp: = 100ms
Fall Time of Headphone Amp: = 200ms
(5)
(3) >0
(4)
(7) GD (8) 1061/fs
Normal Operation
AKM CONFIDENTIAL
FFH(0dB)
(7)
- 23 -
(8)
(6)
00H(MUTE)
Don’t care
Don’t care
PD
(5)
Normal Operation
(7) (8)
FFH(0dB)
(7)
00H(MUTE)
(8)
(6)
Don’t care
PD
[AK4566]
(9)
2002/2

Related parts for ak4566vn