FPS100024 TDK Corporation, FPS100024 Datasheet - Page 54

• Manufacturer Part Number: FPS100024
• Description: PWR SUP FNT END 24V 960W 40A
• Manufacturer: TDK Corporation
• Series: FPSr
• Type: Commercialr

Specifications of FPS100024

• Power Supply Type: Switching (Closed Frame)
• Voltage - Output: 24V
• Number Of Outputs: 1
• Power (watts): 1000W
• Applications: Commercial
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 24 VDC @ 40A
• Size / Dimension: 1.61" L x 5" W x 11.4" H (40.9mm x 127mm x 289.6mm)
• Power (watts) - Rated: 960W
• Operating Temperature: 0°C ~ 70°C
• Efficiency: 86%
• Approvals: CE, EN, UL
• Line Regulation: 0.4%
• Load Regulation: 0.8%
• Power Supply Output Type: Fixed
• No. Of Outputs: 1
• Output Voltage: 24V
• Output Current: 40A
• Power Rating: 960W
• Input Voltage: 85V AC - 265V AC / 120V DC To 360V DC.
• Brand/series: FPS1000 Series
• Configuration: Enclosed
• Operation: Linear
• Output: 24 VDC @ 40 A
• Power, Output: 960 W
• Primary Type: AC-DC
• Special Features: High Efficiency, Hot Swappable, PFC, Remote On/Off, Remote Sense
• Voltage, Input: 85 to 265/120 to 360 VAC/VDC
• Voltage, Output: 24 VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1237

CHAPTER 21
21.1 Introduction
The FPS-T1U rack provides access to the I
panel MOLEX female connector located at the rear panel. The Clock is connected to pin 2 and the Data
is connected to pin 1. The specifications of the I
are installed in the FPS-T1U rack. Refer to Chapter 7 for the specifications and all operating details.
21.2 Addressing (A0, A1, A2).
The address line of the FPS1000/S units installed in the FPS-T1U rack are internally fixed
Refer to the following table for detailes:
Note: Address are applicable when modules FPS1000/S (I2C option) are used
Module “A”
Module “B”
Module “C”
A0
FPS-T1U I
1
0
1
The I
referenced to the -Sense potential. When using series
connection of FPS-T1U racks, do not connect the
A1
2
1
1
0
C bus address lines, serial clock and data are
2
C BUS INTERFACE OPTION
I
2
C lines of the units together.
A2
1
1
1
2
C Bus interface in each installed FPS1000/S unit via the rear
CAUTION
2
C of the FPS1000/S power supplies are kept when they
51
FPS-T1U Instruction Manual