CY8CKIT-006 Cypress Semiconductor Corp, CY8CKIT-006 Datasheet - Page 12

• Manufacturer Part Number: CY8CKIT-006
• Description: KIT DEV PSOC3 LCD SEGMENT
• Manufacturer: Cypress Semiconductor Corp
• Series: PSOC™ 3r

Specifications of CY8CKIT-006

• Main Purpose: Displays, LCD Display
• Embedded: Yes, MCU, 32-Bit
• Primary Attributes: 448 addressable segments
• Secondary Attributes: Configurable LCD pin selection
• Description/function: Evaluation Kit
• Interface Type: USB
• Backlighting: No Backlighting
• Data Bus Width: 8 bit, 16 bit, 32 bit
• Maximum Operating Temperature: + 50 C
• Minimum Operating Temperature: 0 C
• Number Of Segments: 7
• Operating Supply Voltage: 12 V
• Operating Voltage: 3.3 V
• Pixel Format: 16 x 28
• Product: Display Modules
• Software: Software Included
• Touch Panel: No Touch Panel
• For Use With/related Products: PSoC 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Utilized Ic / Part: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2994

Kit Operation
3.4
3.4.1
3.4.2
12
RTC/TEMP
The RTC/TEMP menu has five sub menus.
Table 3-4. RTC/TEMP Sub Menu Options
Press "+" or "-" to select one of the sub menu items and then SEL button to enter the sub menu
options.
If you press the RET button at anytime in the RTC/TEMP sub menu, the project returns to the RTC/
TEMP main menu.
2:Clock
This sub menu displays the current time on large 7-segment display with AM/PM displayed on the
16-segment and 14-segment displays. The colon separator in the 7-segment display flashes on/off
automatically marking seconds (one second on; one second off). If the time is set, then it is
displayed as 12-hour time with AM or PM. If the time is not set since the last power cycle, the time at
the minute that the power was last turned off will flash on/off. Press SEL to stop the flashing, but
verify the time is correct.
If the alarm is turned on, then the alarm time is displayed on the small 7-segment display with either
the small AM or PM icons displayed along with the BELL icon. If the alarm is off, then all the alarm
display elements are turned off.
Date and temperature are displayed on the matrix display. The date and temperature are flashed
one after the other. The temperature display can be alternated between °C and °F by pressing the
"+" or "-" buttons.
When the alarm sounds, press SEL to stop the alarm. Press RET to return to the RTC/TEMP main
menu.
2.SetTim
This submenu allows to set the clock time of the day.
Enter H1H2:M1M2 in 12 hour AM/PM clock time. The clock time is entered and displayed on the
large 7-segment displays using the four display characters to the right and the colon icon separating
the H1H2 and M1M2 characters. AM and PM are displayed on the 16-segment and 14-segment
display characters.
■
■
■
■
■
■
■
2:Clock
2:SetTim
2:SetDat
2:SetAlm
2:Alarm
The project displays 12:00 the first time that time is set; the left H position (H1) of the large 7-seg-
ment display is flashed.
Press "+" or "-" button to select the higher hour digit, '0' or '1'.
Press SEL to advance to the next H position (H2).
Press "+" or "-" to select '0' - '9' if H1 is '0' or to select '0' - '2' if H1 is '1'.
Press SEL to advance to the left M position (M1).
Press "+" or "-" to select '0' - '5'.
Press SEL to advance to the next M position (M2).
Option
CY8CKIT-006 PSoC 3 LCD Segment Drive Evaluation Kit Guide, Doc. # 001-52798 Rev. *C
Show time, date, and temperature
Enter time of day
Enter calendar date
Enter alarm time of day
Turn alarm on/off
Brief Description
[+] Feedback