CY8CKIT-006 Cypress Semiconductor Corp, CY8CKIT-006 Datasheet - Page 64

• Manufacturer Part Number: CY8CKIT-006
• Description: KIT DEV PSOC3 LCD SEGMENT
• Manufacturer: Cypress Semiconductor Corp
• Series: PSOC™ 3r

Specifications of CY8CKIT-006

• Main Purpose: Displays, LCD Display
• Embedded: Yes, MCU, 32-Bit
• Primary Attributes: 448 addressable segments
• Secondary Attributes: Configurable LCD pin selection
• Description/function: Evaluation Kit
• Interface Type: USB
• Backlighting: No Backlighting
• Data Bus Width: 8 bit, 16 bit, 32 bit
• Maximum Operating Temperature: + 50 C
• Minimum Operating Temperature: 0 C
• Number Of Segments: 7
• Operating Supply Voltage: 12 V
• Operating Voltage: 3.3 V
• Pixel Format: 16 x 28
• Product: Display Modules
• Software: Software Included
• Touch Panel: No Touch Panel
• For Use With/related Products: PSoC 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Utilized Ic / Part: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2994

Firmware
5.3.14
5.3.15
64
Figure 5-58. Pin Connection Mapping Page 2
Low Power Operation
The design also includes the ability to go to low power operation. When the device goes to low
power operation, only the RTC component is left running. It periodically wakes up the PSoC enough
to strobe the ZZZ icon on and off to indicate that the device is in low power mode. To bring the device
out of low power mode, press and hold the push button switch. When the device wakes up at the
next ZZZ strobe interval, it samples the push button and return to normal operations if the button is
pressed.
Low Power Entry
The following tasks must be performed prior to entering low power:
1. Set 32 kHz clock to low power mode (API call).
2. Set trim registers (sleep and wake trims).
3. Stop timer components (except RTC).
4. Disable component clocks.
5. Deactivate accelerometer.
6. Deactivate thermistor VDAC reference generator.
CY8CKIT-006 PSoC 3 LCD Segment Drive Evaluation Kit Guide, Doc. # 001-52798 Rev. *C
[+] Feedback