OM11027 NXP Semiconductors, OM11027 Datasheet - Page 53

• Manufacturer Part Number: OM11027
• Description: BOARD EVAL LPC2939
• Manufacturer: NXP Semiconductors
• Type: MCUr

Specifications of OM11027

• Contents: Board
• For Use With/related Products: LPC2939
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 568-4787

NXP Semiconductors
LPC2939_3
Product data sheet
Fig 12. Block diagram of the CGU0 (see
CLOCK GENERATION UNIT (CGU0)
400 kHz LP_OSC
OSCILLATOR
EXTERNAL
FREQUENCY
MONITOR
There are two primary clock generators: a low-power ring oscillator (LP_OSC) and a
crystal oscillator. See
LP_OSC is the source for the BASE_PCR_CLK that clocks the CGU itself and for
BASE_SAFE_CLK that clocks a minimum of other logic in the device (like the watchdog
timer). To prevent the device from losing its clock source LP_OSC cannot be put into
power-down. The crystal oscillator can be used as source for high-frequency clocks or as
an external clock input if a crystal is not connected.
Secondary clock generators are a PLL and seven fractional dividers (FDIV0:6). The PLL
has three clock outputs: normal, 120 phase-shifted and 240 phase-shifted.
PLL
clkout
clkout120
clkout240
DETECTION
CLOCK
All information provided in this document is subject to legal disclaimers.
Table 27
Figure
Rev. 03 — 7 April 2010
AHB TO DTL BRIDGE
for all base clocks)
12.
FDIV0
FDIV1
FDIV6
ARM9 microcontroller with CAN, LIN, and USB
OUT 0
OUT 1
OUT 2
OUT 3
OUT 11
002aae147
LPC2939
© NXP B.V. 2010. All rights reserved.
BASE_SAFE_CLK
BASE_SYS_CLK
BASE_PCR_CLK
BASE_IVNSS_CLK
BASE_ICLK1_CLK
53 of 99