AT91SAM9G45-EKES Atmel, AT91SAM9G45-EKES Datasheet - Page 48

• Manufacturer Part Number: AT91SAM9G45-EKES
• Description: KIT EVAL FOR AT91SAM9G45
• Manufacturer: Atmel
• Series: AT91SAM Smart ARMr
• Type: MCUr

Specifications of AT91SAM9G45-EKES

• Contents: Board
• Processor To Be Evaluated: SAM9G45
• Data Bus Width: 32 bit
• Interface Type: I2C, SPI, UART
• Maximum Operating Temperature: + 50 C
• Minimum Operating Temperature: - 10 C
• Operating Supply Voltage: 1.8 V to 3.3 V
• For Use With/related Products: AT91SAM9G45
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4626953

10.7
10.8
10.9
10.10 USB High Speed Device Port (UDPHS)
48
Pulse Width Modulation Controller (PWM)
High Speed Multimedia Card Interface (MCI)
USB High Speed Host Port (UHPHS)
AT91SAM9G45
• Each channel is user-configurable and contains:
• Two global registers that act on all three TC Channels
• Four channels, one 16-bit counter per channel
• Common clock generator, providing Thirteen Different Clocks
• Independent channel programming
• Compatibility with MultiMedia Card Specification Version 4.3
• Compatibility with SD Memory Card Specification Version 2.0
• Compatibility with SDIO Specification Version V2.0.
• Compatibility with Memory Stick PRO
• Compatibility with CE ATA
• Compliant with Enhanced HCI Rev 1.0 Specification
• Compliant with Open HCI Rev 1.0 Specification
• Root Hub Integrated with 2 Downstream USB Ports
• Shared Embedded USB Transceivers
• USB V2.0 high-speed compliant, 480 MBits per second
• Embedded USB V2.0 UTMI+ high-speed transceiver shared with UHP HS.
– Delay Timing
– Pulse Width Modulation
– Up/down Capabilities
– Three external clock inputs
– Five internal clock inputs
– Two multi-purpose input/output signals
– A Modulo n counter providing eleven clocks
– Two independent Linear Dividers working on modulo n counter outputs
– Independent Enable Disable Commands
– Independent Clock Selection
– Independent Period and Duty Cycle, with Double Buffering
– Programmable selection of the output waveform polarity
– Programmable center or left aligned output waveform
– Compliant with USB V2.0 High-speed and Full-speed Specification
– Supports Both High-speed 480Mbps and Full-speed 12 Mbps USB devices
– Compliant with USB V2.0 Full-speed and Low-speed Specification
– Supports Both Low-speed 1.5 Mbps and Full-speed 12 Mbps USB devices
6438ES–ATARM–21-Jun-10