HS0005KCU04H Renesas Electronics America, HS0005KCU04H Datasheet - Page 59

• Manufacturer Part Number: HS0005KCU04H
• Description: EMULATOR E10A-USB SUPERH RISC
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of HS0005KCU04H

• Contents: Emulation Module
• For Use With/related Products: SH7205, SH7265
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

6.
The [CPU Select] dialog box has the following options.
•
•
Do not to use the [Reset assert (Auto Connect)] option unless the
port connector is properly connected as shown in Section 1.5,
Recommended Circuit between the H-UDI Port Connector and the
MPU of the additional document, ″Supplementary Information on
Using the SHxxxx″. Using the [Auto connect] option without the
proper connection will damage the user system.
Selects finding of the fastest usable JTAG clock value, and starting up with this as the initial
value.
A reset signal is generated by the emulator, and steps 12 and 14 are skipped.
If the [Reset assert (Auto Connect)] option is in use, turn on the power to the user system at
this stage.
Select the device name in use from the [CPU Select] drop-down list box and click on OK.
[Search the best JTAG clock] check box
[Reset assert (Auto Connect)] check box
The [CPU Select] dialog box or [Select Emulator mode] dialog box is displayed.
Figure 3.17 [CPU Select] Dialog Box
CAUTION
Rev. 2.00 Nov. 19, 2009 Page 37 of 294
REJ10J1766-0200