101-0401 Rabbit Semiconductor, 101-0401 Datasheet - Page 14

• Manufacturer Part Number: 101-0401
• Description: KIT DEV RABBIT2000/TCP/IP
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0401

• Rohs Status: RoHS non-compliant
• Contents: Rabbit 2000™ TCP/IP Development Board, Demo Board, Power Supply, Cable and Software
• Processor To Be Evaluated: Rabbit 2000
• Interface Type: RS-232, RS-485
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 101-0401; 316-1005; Q906133

2.2 Connections
1. Attach the rubber feet to the bottom corners of the TCP/IP Development Board.
2. Connect the Programming Cable to the TCP/IP Development Board
Turn the Rabbit 2000 TCP/IP Development Board so that the Rabbit 2000 microprocessor
is facing up as shown below. Connect the 10-pin
cable to header J4 onthe TCP/IP Development Board as shown in Figure 2. Be sure to ori-
ent the red edge of the cable towards pin 1 of the connector. (Do not use the
which is used for a normal serial connection.) Connect the other end of the programming
cable to a COM port on your PC.
10
NOTE: Some PCs now come equipped only with a USB port. If your PC has no RS-232
COM port, but has a USB port, you should buy an RS-232/USB converter from
Z-World’s Web store.
Figure 2. Connecting Power and PC to TCP/IP Development Board
PROG
connector of the programming
TCP/IP Development Kit
DIAG
connector,