101-0401 Rabbit Semiconductor, 101-0401 Datasheet - Page 7

• Manufacturer Part Number: 101-0401
• Description: KIT DEV RABBIT2000/TCP/IP
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0401

• Rohs Status: RoHS non-compliant
• Contents: Rabbit 2000™ TCP/IP Development Board, Demo Board, Power Supply, Cable and Software
• Processor To Be Evaluated: Rabbit 2000
• Interface Type: RS-232, RS-485
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 101-0401; 316-1005; Q906133

1.2 Physical and Electrical Specifications
Table 1 lists the basic specifications for the TCP/IP Development Board.
The TCP/IP Development Board has 15 pins on header J7, one RJ-12 jack for RS-232 or
RS-485 serial communication, and one RJ-45 Ethernet jack. The pinouts are shown in Figure 1.
RJ-45 pinouts are sometimes numbered opposite to the way shown in Figure 1. Regardless
of the numbering convention followed, the pin positions relative to the spring tab position
(located at the bottom of the RJ-45 jack in Figure 1) are always absolute, and the RJ-45
connector will work properly with off-the-shelf Ethernet cables.
User’s Manual
Power Supply
Board Size (with optional
backup-battery board)
Environmental
Specification
Table 1. TCP/IP Development Board Specifications
Figure 1. TCP/IP Development Board I/O Pinout
4.30" × 4.71" × 0.79"
(109 mm × 120 mm × 20 mm)
–40
9 V to 40 V DC
°
C to 70
°
C, 5–95% humidity, noncondensing
Data
3