101-0401 Rabbit Semiconductor, 101-0401 Datasheet - Page 65

• Manufacturer Part Number: 101-0401
• Description: KIT DEV RABBIT2000/TCP/IP
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0401

• Rohs Status: RoHS non-compliant
• Contents: Rabbit 2000™ TCP/IP Development Board, Demo Board, Power Supply, Cable and Software
• Processor To Be Evaluated: Rabbit 2000
• Interface Type: RS-232, RS-485
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 101-0401; 316-1005; Q906133

B.1 Power Supplies
Power is supplied to the TCP/IP Development Board from an external source either
through header J7 or from another TCP/IP Development Board through header J5, the
RJ-12 jack.
The TCP/IP Development Board itself is protected against reverse polarity by Shottky
diodes at D6 and D7 as shown in Figure B-1. The Shottky diode has a low forward voltage
drop, 0.3 V, which keeps the minimum DCIN required to power the TCP/IP Development
Board lower than a normal silicon diode would allow.
Capacitor C28 provides surge current protection for the voltage regulator, and allows the
external power supply to be located some distance away from the TCP/IP Development
Board. A switching power regulator is used. The input voltage range is from 9 V to 40 V.
Getting Started
Appendix B describes the power circuitry distributed on the
TCP/IP Development Board.
A
Figure B-1. TCP/IP Development Board Power Supply Schematic
PPENDIX
B. P
OWER
M
ANAGEMENT
61