101-0401 Rabbit Semiconductor, 101-0401 Datasheet - Page 34

• Manufacturer Part Number: 101-0401
• Description: KIT DEV RABBIT2000/TCP/IP
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore 2000r
• Type: MPU Moduler

Specifications of 101-0401

• Rohs Status: RoHS non-compliant
• Contents: Rabbit 2000™ TCP/IP Development Board, Demo Board, Power Supply, Cable and Software
• Processor To Be Evaluated: Rabbit 2000
• Interface Type: RS-232, RS-485
• For Use With/related Products: RCM2000, RCM2010, RCM2020
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 101-0401; 316-1005; Q906133

•
•
3. Apply Power
When working with the TCP/IP Development Board, the green
program is running and the board is properly connected either to an Ethernet hub or to an
active Ethernet card. The red
30
The following options require more care in address selection and testing actions, as
conflicts with other users, servers and systems can occur:
LAN —
preferably one to which the development PC is already connected. You will need to
obtain IP addressing information from your network administrator.
WAN —
net and other Wide Area Networks, but exceptional care should be used with IP address
settings and all network-related programming and development. We recommend that
development and debugging be done on a local network before connecting a TCP/IP
Development Board to the Internet.
The PC running Dynamic C does not need to be the PC with the Ethernet card.
Plug in the AC adapter. The TCP/IP Development Board is now ready to be used.
TIP: Checking and debugging the initial setup on a micro-LAN is recommended before
NOTE: A hardware RESET is accomplished by unplugging the AC adapter, then plug-
connecting the system to a LAN or WAN.
ging it back in.
Connect the TCP/IP Development Board’s Ethernet port to an existing LAN,
The TCP/IP Development Board is capable of direct connection to the Inter-
ACT
light flashes each time a packet is received.
LNK
TCP/IP Development Kit
light is on when a