MPC564MZP56 Freescale Semiconductor, MPC564MZP56 Datasheet - Page 1041

• Manufacturer Part Number: MPC564MZP56
• Description: IC MCU 512K FLASH 56MHZ 388-BGA
• Manufacturer: Freescale Semiconductor
• Series: MPC5xxr

Specifications of MPC564MZP56

• Core Processor: PowerPC
• Core Size: 32-Bit
• Speed: 56MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 56
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 2.7 V
• Data Converters: A/D 32x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 388-BGA
• Core: PowerPC
• Processor Series: MPC5xx
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 56 MHz
• Data Ram Size: 32 KB
• On-chip Adc: Yes
• Number Of Programmable I/os: 56
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 5 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 10 bit
• A/d Channels Available: 32
• Height: 1.95 mm
• Interface Type: CAN, JTAG, QSPI, SCI, SPI, UART
• Length: 27 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 2.7 V, 5.25 V
• Supply Voltage (min): 2.5 V, 4.75 V
• Width: 27 mm
• For Use With: MPC564EVB - KIT EVAL FOR MPC561/562/563/564
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

message has the second highest priority. Refer to
message priorities. The watchpoint message contains the watchpoint code which indicates all the unique
watchpoints have occurred since the last watchpoint message. If duplicate watchpoints occur before the
watchpoint message is sent out, a watchpoint overrun message is generated. The watchpoint source field
will indicate which watchpoints occurred.
The watchpoint message has the following format:
24.12.1.1 Watchpoint Source Field
The watchpoint source field is outlined in
24.12.2 Watchpoint Overrun Error Message
A watchpoint overrun error occurs when the same watchpoint occurs multiple times before the first
occurrence of that watchpoint has been messaged out. The watchpoint message (which has information of
all the watchpoints that occurred prior to the detection of the same watchpoint occurring multiple times)
will be sent before the error message can be sent.
The overrun error causes further watchpoint occurrences to be ignored, until the error message has been
sent. The error code within the error message indicates that a watchpoint overrun error has occurred. Refer
to
The error message has the following format:
Freescale Semiconductor
Table
24-20.
Figure 24-71. Error Message (Watchpoint Overrun) Format
Watchpoint Source
0bXXXXX1
0bXXXX1X
0bXXX1XX
0bXX1XXX
0bX1XXXX
0b1XXXXX
TCODE (8)
TCODE (15)
Figure 24-70. Watchpoint Message Format
[6 bits]
MPC561/MPC563 Reference Manual, Rev. 1.2
[6 bits]
Table 24-32. Watchpoint Source
Length = 11 bits
Length = 12 bits
Table
First L-bus watchpoint (LW0)
Second L-bus watchpoint (LW1)
First I-bus watchpoint (IW0)
Second I-bus watchpoint (IW1)
Third I-bus watchpoint (IW2)
Fourth I-bus watchpoint (IW3)
24-32.
Section 24.7.3, “Message
Error Code (0b00110)
Watchpoint Source
[5 bits]
[6 bits]
Description
Priority,” for further details on
READI Module
24-73