MCF5280CVM66 Freescale Semiconductor, MCF5280CVM66 Datasheet - Page 741

• Manufacturer Part Number: MCF5280CVM66
• Description: IC MPU 32BIT COLDF 256-MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF528xr

Specifications of MCF5280CVM66

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, Ethernet, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 142
• Program Memory Type: ROMless
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Controller Family/series: ColdFire
• No. Of I/o's: 150
• Program Memory Size: 2KB
• Ram Memory Size: 64KB
• Cpu Speed: 66.67MHz
• Embedded Interface Type: CAN, I2C, SPI, UART
• No. Of Pwm Channels: 8
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

B.3
Freescale Semiconductor
Table 33-27 on page
Table 33-27 on page
Table 33-27 on page
Table 33-27 on page
Table 33-27 on page
Table 33-27 on page
Table 33-27 on page
Table 33-28 on page
Table 33-28 on page
Throughout Manual Added MCF5281 device to manual. The MCF5281 implements half the Flash of the MCF5282.
Table A-3 on page
Table 6-12/6-16
Table 6-13/6-20
Figure 6-2/6-4
Table 2-2/2-7
Table 5-1/5-2
Table 5-1/5-3
33.13/33-21
Location
Location
1.1/1-1
33-25
33-25
33-25
33-25
33-25
33-25
33-25
33-27
33-27
A-3
Changes Between Rev. 1 and Rev. 2
Added timing diagrams and tables to
Changed the max value in spec 1 to “1/4.”
Changed the min value in spec 2 to “4.”
Changed the min value in spec 3 to “25.”
Changed the min value in spec 6 to “25.”
Changed the max value in spec 7 to “30.”
Changed the max value in spec 8 to “30.”
Changed the max value in spec 11 to “25.”
Changed the min value in spec D1 to “5.”
Changed the min value in spec D2 to “2.”
Changed offset for the copy of RAMBAR to “0x008.”
Replaced Figure 6-2, “CFM 512K Array Memory Map” and renamed it “CFM Array Memory Map”
Changed the description of real time debug support. It has only one user-visible hardware breakpoint
register.
Change the I field description to read: “Interrupt level mask. Defines the current interrupt level. Interrupt
requests are inhibited for all priority levels less than or equal to the current level, except the edge-sensitive
level 7 request, which cannot be masked.”
Replaced the description of PRI1 and PRI2.
Added note to the SPV bit description, “The BDE bit in the second RAMBAR register must also be set to
allow dual port access to the SRAM. For more information, see Section 8.4.2, ‘Memory Base Address
Register (RAMBAR).’”
Change value for page erase verify command to 0x06.
Change value for page erase verify command to 0x06.
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
Table B-2. Rev. 0.1 to Rev. 1 Changes (continued)
Table B-3. Rev. 1 to Rev. 2 Changes
Section 33.13, “Fast Ethernet AC Timing
Description
Description
Specifications.”
Revision History
B-5