EP9315-IBZ Cirrus Logic Inc, EP9315-IBZ Datasheet - Page 332

• Manufacturer Part Number: EP9315-IBZ
• Description: 32-Bit Microcontroller IC
• Manufacturer: Cirrus Logic Inc
• Series: EP9r

Specifications of EP9315-IBZ

• Controller Family/series: (ARM9)
• Core Size: 32 Bit
• A/d Converter: 12 Bits
• Supply Voltage: 3.3V
• No. Of I/o Pins: 65
• Package / Case: 352-PBGA
• Clock Frequency: 200MHz
• Core Processor: ARM9
• Speed: 200MHz
• Connectivity: EBI/EMI, EIDE, Ethernet, I²C, IrDA, Keypad/Touchscreen, PCMCIA, SPI, UART/USART, USB
• Peripherals: AC'97, DMA, I&sup2:S, LCD, LED, MaverickKey, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: EP93xx
• Core: ARM920T
• Data Bus Width: 32 bit
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: EDB9315A-Z
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 598-1144 - KIT DEVELOPMENT EP9315 ARM9
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 598-1263

9
9-30
1/10/100 Mbps Ethernet LAN Controller
EP93xx User’s Guide
9.2.3.10 Transmit Status Queue
The Transmit Status queue is used to pass transmit status from the MAC to the Host. In
operation the status queue is similar to the transmit descriptor queue, it is a circular queue in
contiguous memory space. The location and size of the queue are set at initialization by the
Host writing to the Transmit Status Queue Base Address, and the Transmit Status Queue
Base Length registers. The base address must point to a word aligned memory location. The
length is set to the actual status queue length in bytes. This should be an integral number of
status entries and should not exceed 64 Kbytes total. The Current Address must be set to
point to the first status entry to be used. This would normally be the first entry in the queue
(same value as the base address).
The Host needs to ensure that in operation there is always room in the status queue for any
transmit frame which is enqueued in the transmit descriptor queue.
TBL:
Copyright 2007 Cirrus Logic
Transmit Buffer Length. This field contains the byte count
of the number of bytes in the transmit buffer. There are no
restrictions on the actual buffer size. If the length is set to
zero, the descriptor will be ignored. A frame may not be
terminated with a zero length buffer.
DS785UM1