CP3BT10G38 National Semiconductor, CP3BT10G38 Datasheet - Page 104

• Manufacturer Part Number: CP3BT10G38
• Description: IC CPU RISC W/LLC&USB 100-LQFP
• Manufacturer: National Semiconductor

Specifications of CP3BT10G38

• Applications: Connectivity Processor
• Core Processor: CR16C
• Program Memory Type: FLASH (256 kB)
• Controller Series: CP3000
• Ram Size: 10K x 8
• Interface: Bluetooth, ACCESS.bus, Audio, UART, USB, Microwire/SPI
• Number Of I /o: 37
• Voltage - Supply: 2.25 V ~ 2.75 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: *CP3BT10G38

www.national.com
17.7.5
The AGCR register controls the basic operation of the inter-
face. The CPU bus master has read/write access to the
AGCR register. After reset, this register is clear.
ASS
DWL
LPB
SCS
CLKEN AAIEN IOM2
IEBC
7
15
FSS
Audio Global Configuration Register (AGCR)
6
14
The Asynchronous/Synchronous Mode Se-
lect bit controls whether the audio interface
operates in Asynchronous or in Synchronous
mode. After reset the ASS bit is clear, so the
Synchronous mode is selected by default.
0 – Synchronous mode.
1 – Asynchronous mode.
The Data Word Length bit controls whether
the transferred data word has a length of 8 or
16 bits. After reset, the DWL bit is clear, so 8-
bit data words are used by default.
0 – 8-bit data word length.
1 – 16-bit data word length.
The Loop Back bit enables the loop back
mode. In this mode, the SRD and STD pins
are internally connected. After reset the LPB
bit is clear, so by default the loop back mode
is disabled.
0 – Loop back mode disabled.
1 – Loop back mode enabled.
The Slot Count Select field specifies the num-
ber of slots within each frame. If the number of
slots per frame is equal to 1, the audio inter-
face operates in normal mode. If the number
of slots per frame is greater than 1, the inter-
face operates in network mode. After reset all
SCS bits are cleared, so by default the audio
interface operates in normal mode.
IEFS
SCS
00
01
10
11
5
13
4
Number of
Slots per
IFS
SCS
12
Frame
1
2
3
4
3
11
FSL
LPB
2
10
Network mode
Network mode
Network mode
Normal mode
DWL
CTF
Mode
1
9
CRF
ASS
8
0
104
IEFS
FSS
IEBC
CRF
CTF
FSL
IFS
The Internal/External Frame Sync bit controls,
whether the frame sync signal for the receiver
and transmitter are generated internally or
provided from an external source. After reset,
the IEFS bit is clear, so the frame synchroni-
zation signals are generated internally by de-
fault.
0 – Internal frame synchronization signal.
1 – External frame synchronization signal.
The Frame Sync Select bit controls whether
the interface (receiver and transmitter) uses
long or short frame synchronization signals.
After reset the FSS bit is clear, so short frame
synchronization signals are used by default.
0 – Short (bit length) frame synchronization
1 – Long (word length) frame synchronization
The Internal/External Bit Clock bit controls
whether the bit clocks for receiver and trans-
mitter are generated internally or provided
from an external source. After reset, the IEBC
bit is clear, so the bit clocks are generated in-
ternally by default.
0 – Internal bit clock.
1 – External bit clock.
The Clear Receive FIFO bit is used to clear
the receive FIFO. When this bit is written with
a 1, all pointers of the receive FIFO are set to
their reset state. After updating the pointers,
the CRF bit will automatically be cleared
again.
0 – Writing 0 has no effect.
1 – Writing 1 clears the receive FIFO.
The Clear Transmit FIFO bit is used to clear
the transmit FIFO. When this bit is written with
a 1, all pointers of the transmit FIFO are set to
their reset state. After updating the pointers,
the CTF bit will automatically be cleared
again.
0 – Writing 0 has no effect.
1 – Writing 1 clears the transmit FIFO.
The Frame Sync Length field specifies the
length of the frame synchronization signal,
when a long frame sync signal (FSS = 1) and
a 16-bit data word length (DWL = 1) are used.
If an 8-bit data word length is used, long frame
syncs are always 6 bit clocks in length.
The Inverted Frame Sync bit controls the po-
larity of the frame sync signal.
0 – Active-high frame sync signal.
1 – Active-low frame sync signal.
signal.
signal.
FSL
00
01
10
11
Frame Sync Length
13 bit clocks
14 bit clocks
15 bit clocks
16 bit clocks