STA381BWSTR STMicroelectronics, STA381BWSTR Datasheet - Page 28

• Manufacturer Part Number: STA381BWSTR
• Description: Audio DSPs Sound Terminal 2.1 High EFF Dig Audio
• Manufacturer: STMicroelectronics

Specifications of STA381BWSTR

• Product Category: Audio DSPs
• Rohs: yes
• Operating Supply Voltage: 4.5 V to 25.5 V
• Operating Temperature Range: 0 C to + 150 C
• Mounting Style: SMD/SMT
• Package / Case: VQFN-48
• Snr: 100 dB

Device overview
4.2
4.3
28/171
Input oversampling
Figure 4
Fs is used, the default x2 oversampling ratio can be increased to a x3.
Activating this feature, it is possible to have a 384 kHz PWM switching frequency (instead of
the default 256 kHz) when 32 kHz Fs is used.
When bit 0 of register PLLCFG1 is set to one, the feature is activated so that the PLL ratio is
modified to generate 49.152 MHz internal clock and the audio data path (after the input
oversampling block) is running at 96 kHz.
It is not recommended to use the x3 oversampling feature when Fs > 32 kHz because of the
PLL maximum frequency constraint.
STCompressor
The STCompressor
(DRC) and its main purpose is to provide optimum output power level control for speaker
protection, preserving as much as possible the original audio quality of the signal.
Two main I
data flow control bits, these registers also allow enabling the checksum engine to protect the
STC filters from erroneous coefficients downloads, thus improving the final application
circuitry and safety of the speakers.
shows the input oversampling block in front of the main processing. When 32 kHz
2
C registers control the STC behavior: STCCFG0 and STCCFG1. On top of the
TM
TM
(STC from now on) is a stereo, dual-band Dynamic Range Control
Doc ID 018937 Rev 6
STA381BWS