MA240017 Microchip Technology, MA240017 Datasheet - Page 96

• Manufacturer Part Number: MA240017
• Description: MODULE PLUG-IN PIC24F16KA102 PIM
• Manufacturer: Microchip Technology
• Series: PIC®r

Specifications of MA240017

• Accessory Type: Plug-In Module (PIM) - PIC24F16KA102
• Product: Microcontroller Modules
• Data Bus Width: 16 bit
• Core Processor: PIC24F16KA102
• Operating Supply Voltage: 3 V to 3.6 V
• Development Tools By Supplier: Integrated Development Environment, Assembler, ANSI C Compiler
• Processor Series: PIC24F
• Silicon Manufacturer: Microchip
• Core Architecture: PIC
• Core Sub-architecture: PIC24
• Silicon Core Number: PIC24F
• Silicon Family Name: PIC24FxxKAxx
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: Explorer 16 (DM240001 or DM240002)
• For Use With: DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24F16KA102 FAMILY
REGISTER 9-1:
DS39927B-page 94
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
2:
Reset values for these bits are determined by the FNOSC Configuration bits.
Also resets to ‘0’ during any valid clock switch or whenever a non-PLL Clock mode is selected.
CLKLOCK: Clock Selection Lock Enabled bit
If FSCM is enabled (FCKSM1 = 1):
1 = Clock and PLL selections are locked
0 = Clock and PLL selections are not locked and may be modified by setting the OSWEN bit
If FSCM is disabled (FCKSM1 = 0):
Clock and PLL selections are never locked and may be modified by setting the OSWEN bit.
Unimplemented: Read as ‘0’
LOCK: PLL Lock Status bit
1 = PLL module is in lock or PLL module start-up timer is satisfied
0 = PLL module is out of lock, PLL start-up timer is running or PLL is disabled
Unimplemented: Read as ‘0’
CF: Clock Fail Detect bit
1 = FSCM has detected a clock failure
0 = No clock failure has been detected
Unimplemented: Read as ‘0’
SOSCEN: 32 kHz Secondary Oscillator (SOSC) Enable bit
1 = Enable secondary oscillator
0 = Disable secondary oscillator
OSWEN: Oscillator Switch Enable bit
1 = Initiate an oscillator switch to clock source specified by NOSC<2:0> bits
0 = Oscillator switch is complete
OSCCON: OSCILLATOR CONTROL REGISTER (CONTINUED)
(2)
Preliminary
© 2009 Microchip Technology Inc.