AT89C51CC03C-S3RIM Atmel, AT89C51CC03C-S3RIM Datasheet - Page 49

• Manufacturer Part Number: AT89C51CC03C-S3RIM
• Description: IC 8051 MCU FLASH 64K 52PLCC
• Manufacturer: Atmel
• Series: AT89C CANr

Specifications of AT89C51CC03C-S3RIM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, SPI, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 52-PLCC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: AT89C51CC03CS3RTR

4182O–CAN–09/08
order. The page address of the last address loaded in the column latches will be used
for the whole page.
When programming is launched, an automatic erase of the locations loaded in the col-
umn latches is first performed, then programming is effectively done. Thus no page or
block erase is needed and only the loaded data are programmed in the corresponding
page
Notes:
The following procedure is used to load the column latches and is summarized in
Figure 25:
•
•
•
•
•
•
•
Save and Disable interrupt and map the column latch space by setting FPS bit.
Load the DPTR with the address to load.
Load Accumulator register with the data to load.
Execute the MOVX @DPTR, A instruction.
If needed loop the three last instructions until the page is completely loaded.
unmap the column latch.
Restore Interrupt
1. : If no bytes are written in the column latches the SEQERR bit in the FSTA register
2. When a flash write sequence is in progress (FBUSY is set) a write sequence to the
3. MOVX @DPTR, A instruction must be used to load the column latches. Never use
4. When a programming sequence is launched, Flash bytes corresponding to activated
will be set.
column latches will be ignored and the content of the column latches at the time of
the launch write sequence will be preserved.
MOVX @Ri, A instructions.
bytes in the column latches are first erased then the bytes in the column latches are
copied into the Flash bytes. Flash bytes corresponding to bytes in the column latches
not activated (not loaded during the load column latches sequence) will not be erased
and written.
AT89C51CC03
49