AT89C51CC03C-S3RIM Atmel, AT89C51CC03C-S3RIM Datasheet - Page 53

IC 8051 MCU FLASH 64K 52PLCC

AT89C51CC03C-S3RIM

Manufacturer Part Number
AT89C51CC03C-S3RIM
Description
IC 8051 MCU FLASH 64K 52PLCC
Manufacturer
Atmel
Series
AT89C CANr

Specifications of AT89C51CC03C-S3RIM

Core Processor
8051
Core Size
8-Bit
Speed
40MHz
Connectivity
CAN, SPI, UART/USART
Peripherals
POR, PWM, WDT
Number Of I /o
36
Program Memory Size
64KB (64K x 8)
Program Memory Type
FLASH
Eeprom Size
2K x 8
Ram Size
2.25K x 8
Voltage - Supply (vcc/vdd)
3 V ~ 5.5 V
Data Converters
A/D 8x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Package / Case
52-PLCC
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
AT89C51CC03CS3RTR

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AT89C51CC03C-S3RIM
Manufacturer:
Atmel
Quantity:
10 000
Power Down Request
Reading the Flash Spaces
User
Extra Row
Hardware Security Byte
Flash Protection from Parallel
Programming
4182O–CAN–09/08
Before entering in Power Down (Set bit PD in PCON register) the user should check that
no write sequence is in progress (check BUSY=0), then check that the column latches
are reset (FLOAD=0 in FSTA register. Launch a reset column latches to clear FLOAD if
necessary.
The following procedure is used to read the User space:
Note:
The following procedure is used to read the Extra Row space and is summarized in
Figure 28:
The following procedure is used to read the Hardware
summarized in Figure 28:
Figure 28. Clear FCON to unmap the Hardware Security Byte.Reading Procedure
The three lock bits in Hardware Security Byte (see "In-System Programming" section)
are programmed according to Table 17 provide different level of protection for the on-
chip code and data located in FM0 and FM1.
The only way to write this bits are the parallel mode. They are set by default to level 4
Read one byte in Accumulator by executing MOVC A,@A+DPTR with
A+DPTR=read@.
Map the Extra Row space by writing 02h in FCON register.
Read one byte in Accumulator by executing MOVC A,@A+DPTR with A = 0 and
DPTR = FF80h to FFFFh.
Clear FCON to unmap the Extra Row.
Map the Hardware Security space by writing 04h in FCON register.
Read the byte in Accumulator by executing MOVC A,@A+DPTR with A = 0 and
DPTR = 0000h.
FCON is supposed to be reset when not needed.
Exec: MOVC A, @A+DPTR
Flash Spaces Reading
Flash Spaces Mapping
FCON= 00000xx0b
DPTR= Address
FCON = 00h
Clear Mode
Data Read
ACC= 0
AT89C51CC03
Security
space and is
53

Related parts for AT89C51CC03C-S3RIM