MC908LD64IFUE Freescale Semiconductor, MC908LD64IFUE Datasheet - Page 181

• Manufacturer Part Number: MC908LD64IFUE
• Description: IC MCU 8BIT FOR LCD 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC908LD64IFUE

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 6MHz
• Connectivity: I²C, USB
• Peripherals: OSD, POR, PWM
• Number Of I /o: 39
• Program Memory Size: 60KB (60K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 64-QFP
• Processor Series: HC08LD
• Core: HC08
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, USB
• Maximum Clock Frequency: 6 MHz
• Number Of Programmable I/os: 39
• Number Of Timers: 2
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: FSICEBASE, M68CBL05CE
• Minimum Operating Temperature: 0 C
• On-chip Adc: 8 bit, 6 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

13.4.4 Continuous Conversion
13.4.5 Accuracy and Precision
13.5 Interrupts
13.6 Low-Power Modes
13.6.1 Wait Mode
MC68HC908LD64
Freescale Semiconductor
—
Rev. 3.0
In the continuous conversion mode, the ADC continuously converts the
selected channel filling the ADC data register with new data after each
conversion. Data from the previous conversion will be overwritten
whether that data has been read or not. Conversions will continue until
the ADCO bit is cleared. The conversion complete bit, COCO, in the
ADC status and control register is set after each conversion and can be
cleared by writing to the ADC status and control register or reading of the
ADC data register.
The conversion process is monotonic and has no missing codes.
When the AIEN bit is set, the ADC module is capable of generating a
CPU interrupt after each ADC conversion. A CPU interrupt is generated
if the COCO bit is at logic 0. The COCO bit is not used as a conversion
complete flag when interrupts are enabled. The interrupt vector is
defined in
The WAIT and STOP instruction can put the MCU in low-power
consumption standby modes.
The ADC continues normal operation during wait mode. Any enabled
CPU interrupt request from the ADC can bring the MCU out of wait
mode. If the ADC is not required to bring the MCU out of wait mode,
power down the ADC by setting the ADCH[4:0] bits in the ADC status
and control register to logic 1’s before executing the WAIT instruction.
Analog-to-Digital Converter (ADC)
Table 2-1 . Vector
Addresses.
Analog-to-Digital Converter (ADC)
Data Sheet
Interrupts
181