M37542F8FP#U0 Renesas Electronics America, M37542F8FP#U0 Datasheet - Page 86

• Manufacturer Part Number: M37542F8FP#U0
• Description: IC 740 MCU FLASH 32K 36SSOP
• Manufacturer: Renesas Electronics America
• Series: 740/38000r

Specifications of M37542F8FP#U0

• Core Processor: 740
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SIO, UART/USART
• Peripherals: WDT
• Number Of I /o: 29
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 85°C
• Package / Case: 36-SSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

7542 Group
Parallel I/O Mode
The parallel I/O mode is used to input/output software commands,
address and data in parallel for operation (read, program and
erase) to internal flash memory.
Use the external device (writer) only for 7542 Group (flash
memory version). For details, refer to the user’s manual of each
writer manufacturer.
• User ROM and Boot ROM Areas
In parallel I/O mode, the User ROM and Boot ROM areas shown
in Figure 97 can be rewritten. Both areas of flash memory can be
operated on in the same way.
The Boot ROM area is 4 Kbytes in size and located at addresses
F000
through FFFF
. Make sure program and block erase op-
16
16
erations are always performed within this address range. (Access
to any location outside this address range is prohibited.)
In the Boot ROM area, an erase block operation is applied to only
one 4 Kbyte block. The boot ROM area has had a standard serial
I/O mode control program stored in it when shipped from the fac-
tory. Therefore, using the MCU in standard serial I/O mode, do not
rewrite to the Boot ROM area.
Rev.3.03
Jul 11, 2008
Page 84 of 117
REJ03B0006-0303