ATXMEGA16A4-CUR Atmel, ATXMEGA16A4-CUR Datasheet - Page 73

• Manufacturer Part Number: ATXMEGA16A4-CUR
• Description: MCU AVR 16+4KB FLASH 49VFBGA
• Manufacturer: Atmel
• Series: AVR® XMEGAr

Specifications of ATXMEGA16A4-CUR

• Core Processor: AVR
• Core Size: 8/16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 34
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 1.6 V ~ 3.6 V
• Data Converters: A/D 12x12b, D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 49-VFBGA
• For Use With: ATAVRONEKIT - KIT AVR/AVR32 DEBUGGER/PROGRMMRATSTK600 - DEV KIT FOR AVR/AVR32770-1007 - ISP 4PORT ATMEL AVR MCU SPI/JTAG770-1004 - ISP 4PORT FOR ATMEL AVR MCU SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.8.2
8077H–AVR–12/09
CHnCTRL – Event Channel n Control Register
.
• Bit 7 - Reserved
This bit is reserved and will always be read as zero. For compatibility with future devices, always
write this bit to zero when this register is written.
• Bit 6:5 - QDIRM[1:0]: Quadrature Decode Index Recognition Mode
These bits determine the quadrature state for the QDPH0 and QDPH90 signals where a valid
index signal is recognized and the counter index data event is given according to
page
nal is used.
These bits are only available for CH0CTRL, CH2CTRL and CH4CTRL
Table 6-5.
• Bit 4 - QDIEN: Quadrature Decode Index Enable
When this bit is set the event channel will be used as QDEC index source, and the index data
event will be enabled.
These bit is only available for CH0CTRL, CH2CTRL and CH4CTRL.
• Bit 3 - QDEN: Quadrature Decode Enable
Setting this bit enables QDEC operation.
These bits is only available for CH0CTRL, CH2CTRL and CH4CTRL.
• Bit 2:0 - DIGFILT[2:0]: Digital Filter Coefficient
These bits define the length of digital filtering used. Events will be passed through to the event
channel only when the event source has been active and sampled with the same level for a a
number of peripheral clock for the number of cycles as defined by DIGFILT.
Bit
Read/Write
Initial Value
QDIRM[1:0]
0
0
1
1
73. These bits is only needed to set when a quadrature encoed with a connected index sig-
0
1
0
1
QDIRM Bit Settings
7
R
0
-
Index Recognition State
{QDPH0, QDPH90} = 0b00
{QDPH0, QDPH90} = 0b01
{QDPH0, QDPH90} = 0b10
{QDPH0, QDPH90} = 0b11
R/W
6
0
QDIRM[1:0]
R/W
5
0
QDIEN
R/W
4
0
QDEN
R/W
3
0
R/W
2
0
DIGFILT[2:0]
R/W
1
0
XMEGA A
R
0
0
Table 6-5 on
CHnCTRL
73