DF36034HJV Renesas Electronics America, DF36034HJV Datasheet - Page 371

• Manufacturer Part Number: DF36034HJV
• Description: MCU 3/5V 32K J-TEMP PB-FREE 64-Q
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of DF36034HJV

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SSU
• Peripherals: PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFP
• For Use With: R0K436079S000BE - KIT DEV FOR H8/36079 W/COMPILER
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Receive procedure and operation are as follows.
1. Write data of a receive message to MCn0, MCn4 to MCn7, and MDn0 to MDn7 [n = 0 to 3]
2. On detecting EOF of a data frame or remote frame, the TinyCAN compares the receive
3. When the identifier has been compared at the seventh bit of the EOF or the higher bit, the
4. After the message has been written to the receive Mailbox, the DFRI bit in TCIRR0 and the
5. When the MBn bit in RXPR or the MBn bit in RFPR is set to 1, the temporary buffer is
before setting MBCR corresponding to the Mailbox of the receive message to 1 (initial
setting).
message identifier with the identifier set in the receive Mailbox. After LAFM has been read
and then the identifier set in Mailbox 3 (receive mailbox) has been read, the read data is
compared with the receive message identifier. When a mismatch occurs even if the identifier
mask is set, the same comparison procedure is repeated for all other Mailboxes; starting from
Mailbox 2 (receive mailbox) and ending with Mailbox 0. If a mismatch occurs in Mailbox 0,
the TinyCAN clears the temporary buffer and enters the idle state.
message is written to the receive Mailbox whose identifier matches that of the receive
message. The identifier, which is masked by LAFM, may be overwritten. If there is more than
one Mailbox whose ID and LAFM matches with those of the receive message, the Mailbox
with the highest number is always to receive the relevant message. Note that Mailboxes with
lower numbers cannot receive that message.
MBn bit in RXPR are set to 1 when the receive message is a data frame, the RFRI bit in
TCIRR0 and the MBn bit in RFPR are set to 1 when the receive message is a remote frame,
and the OVRI bit in TCIRR1 and the MBn bit in UMSR are set to 1 when an overrun or
overwrite occurs.
cleared. When the TinyCAN transmits message 2, the internal arbitration is determined, and
the transmit message is transferred to the temporary buffer and output to HTXD after the
temporary buffer has been cleared.
Section 15 Controller Area Network for Tiny (TinyCAN)
Rev. 4.00 Mar. 15, 2006 Page 337 of 556
REJ09B0026-0400