MC68HC908AB32CFU Freescale Semiconductor, MC68HC908AB32CFU Datasheet - Page 149

• Manufacturer Part Number: MC68HC908AB32CFU
• Description: IC MCU 8MHZ 32K FLASH 64-QFP
• Manufacturer: Freescale Semiconductor
• Series: HC08r

Specifications of MC68HC908AB32CFU

• Core Processor: HC08
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI, SPI
• Peripherals: POR, PWM
• Number Of I /o: 51
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

MC68HC908AB32
Freescale Semiconductor
NOTE:
NOTE:
—
Rev. 1.1
The multiplier select bits have built-in protection that prevents them from
being written when the PLL is on (PLLON = 1).
VRS[7:4] — VCO Range Select Bits
The VCO range select bits have built-in protection that prevents them
from being written when the PLL is on (PLLON = 1) and prevents
selection of the VCO clock as the source of the base clock (BCS = 1) if
the VCO range select bits are all clear.
The VCO range select bits must be programmed correctly. Incorrect
programming may result in failure of the PLL to achieve lock.
These read/write bits control the hardware center-of-range linear
multiplier L, which controls the hardware center-of-range frequency
f
9.6.1 PLL Control Register
when the PLLON bit in the PLL control register (PCTL) is set. (See
9.4.2.5 Special Programming
VCO range select bits disables the PLL and clears the BCS bit in the
PCTL. (See
Programming Exceptions
the bits to $6 to give a default range multiply value of 6.
VRS
MUL7:MUL6:MUL5:MUL4
. (See
Table 9-1. VCO Frequency Multiplier (N) Selection
Clock Generator Module (CGM)
9.4.2.1 PLL
0000
0001
0010
0011
1101
1110
1111
9.4.3 Base Clock Selector Circuit
Circuits,
for more information). Reset initializes
(PCTL)). VRS[7:4] cannot be written
Exceptions). A value of $0 in the
9.4.2.4 Programming the
VCO Frequency Multiplier (N)
Clock Generator Module (CGM)
and
13
14
15
1
1
2
3
9.4.2.5 Special
Technical Data
PLL, and
149