XR17D154IV-F Exar Corporation, XR17D154IV-F Datasheet - Page 21

• Manufacturer Part Number: XR17D154IV-F
• Description: IC UART PCI BUS QUAD 144LQFP
• Manufacturer: Exar Corporation
• Type: IrDA or RS- 485r

Specifications of XR17D154IV-F

• Number Of Channels: 4, QUART
• Package / Case: 144-LQFP
• Features: *
• Fifo's: 64 Byte
• Protocol: RS485
• Voltage - Supply: 3.3V, 5V
• With Auto Flow Control: Yes
• With Irda Encoder/decoder: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• Mounting Type: Surface Mount
• Data Rate: 6.25 Mbps
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 3 V
• Supply Current: 4 mA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 3.3 V or 5 V
• No. Of Channels: 4
• Uart Features: Tx/Rx FIFO Counters
• Supply Voltage Range: 3V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: LQFP
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 1016-1290

xr
REV. 1.2.2
Bit 7 represents MPIO7 pin and bit 0 represents MPIO0 pin. There are 5 registers that select, control and
monitor the 8 multipurpose inputs and outputs pins.
MPIOINT [7:0] - (default 0x00)
Enable multipurpose input pin interrupt. If the pin is selected by MPIOSEL as input then bit-0 enables input pin
0 for interrupt, and bit-7 enables input pin 7. No interrupt is enable if the pin is selected to be an output. The
interrupt is edge sensing and determined by MPIOINV and MPIOLVL registers. The MPIO interrupt clears after
a read to register MPIOLVL. The combination of MPIOLVL and MPIOINV determines the interrupt being active
low or active high, it’s level trigger. Logic 0 (default) disables the pin’s interrupt and logic 1 enables it.
2.2.10
MPIO REGISTER
F
IGURE
MPIOINT [7:0]
MPIOLVL [7:0]
Read Input Level
MPIOINV [7:0]
(Input Inversion Enable =1)
MPIOLVL [7:0]
(Output Level)
MPIO3T [7:0]
(3-state Enable =1)
MPIOSEL [7:0]
(Select Input=1, Output=0 )
INT
8. M
ULTIPURPOSE INPUT
AND
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
MPIO7
Multipurpose Input/Output Interrupt Enable
MPIO6
MPIO5 MPIO4 MPIO3 MPIO2 MPIO1 MPIO0
Rising Edge
Detection
MPIOINT Register
OR
Figure 8
/
OUTPUT INTERNAL CIRCUIT
1
0
21
UNIVERSAL (3.3V AND 5V) PCI BUS QUAD UART
shows the internal circuitry.
AND
Pin [7:0]
MPIO
MPIOCKT
XR17D154