CS1W-CN625 Omron, CS1W-CN625 Datasheet - Page 208

• Manufacturer Part Number: CS1W-CN625
• Description: CBL,PROG
• Manufacturer: Omron

Specifications of CS1W-CN625

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Note
Note
The status of the terminating resistance cannot be diagnosed for all nodes in networks
containing the following Controller Link Units/Boards. Visually confirm the settings for
these Units/Boards.
●Any items not supported for a particular model will be grayed out on the display.
●If an item cannot be read from a node, the entire line for that node will be grayed out
• Check the details for all error and warning items in the results of diagnosis. Use the
• Check all the information items to be sure that the settings are intentional. Use the
• Select Diagnose – Node Settings from the Main Menu to diagnose the node
• The Controller Link Network Diagnostic Tool cannot determine the order that nodes
on the display.
Units for which the
terminating resistance
cannot be read
Programming Devices, such as the CX-Net or CX-Programmer, to correct the
settings.
Programming Devices, such as the CX-Net or CX-Programmer, to correct any
settings that are not suitable.
settings again.
are connected in Wired Networks. To enable diagnosis to see if the terminating
resistance is ON only at the ends the network, edit the node file so the nodes appear
in the actual order in which they are physically connected.
Item
C200HW-CLK21Controller Link Unit (for C200HX/HG/HE PLCs)
CVM1-CLK21 Controller Link Unit (for CVM1/CV-series PLCs)
3G8F5-CLK21 ISA Bus Controller Link Support Board
CS1W-RPT01/02/03 Repeater Unit
5-3-3
5-3
Node Settings Diagnosis Example
Units/Boards
Diagnosing Node Settings
5-17