QB-MINI2-EE NEC, QB-MINI2-EE Datasheet - Page 153

• Manufacturer Part Number: QB-MINI2-EE
• Description: EMULATOR, PROGRAMMER, MINICUBE2
• Manufacturer: NEC
• Type: Debug Emulatorr

Specifications of QB-MINI2-EE

• Svhc: No SVHC (18-Jun-2010)
• Mcu Supported Families: MINICUBE2
• Silicon Family Name: V850, 78K0R, 78K0S
• Ic Product Type: On-Chip Debug Emulator
• Kit Contents: MINICUBE2, USB Cable, Target Cable, 78K0-OCD Board
• Features: On-Chip Debugging, Flash Memory Programming,

(9) On-chip debugging option byte setting (address C3H)
(10) FLMD0 pin output status while debugger is running
(11) Operation at voltage with which flash memory cannot be written
The on-chip debugging option byte setting is rewritten arbitrarily by the debugger.
In accordance with the setting in the Flash Programming area in the Configuration dialog box of the debugger,
the FLMD0 pin output status while the debugger is running changes as follows. Rewriting by flash
self-programming is not possible when the output status is low level.
- When Permit is selected: High level (low level for about 100
- When Not Permit is selected: Low level
Do not perform the following operations at a voltage with which flash memory cannot be written. Otherwise,
the subsequent operation may be unstable.
<1> Writing to internal flash memory
<2> Setting or canceling of software breakpoint
<3> Starting execution at the set software breakpoint position
<4> Step execution at the set software breakpoint position
<5> Step-over execution, Return Out execution
<6> Come Here
<7> If Permit is selected in the Flash Programming area in the Configuration dialog box, the following
operations cannot be performed.
a) Setting, changing, or canceling of hardware breaks
b) Masking/unmasking of internal reset
c) Switching of peripheral breaks
CHAPTER 6
HOW TO USE MINICUBE2 WITH 78K0R MICROCONTROLLER
User’s Manual U18371EJ1V0UM
µ
s after reset release)
153