QB-MINI2-EE NEC, QB-MINI2-EE Datasheet - Page 32

• Manufacturer Part Number: QB-MINI2-EE
• Description: EMULATOR, PROGRAMMER, MINICUBE2
• Manufacturer: NEC
• Type: Debug Emulatorr

Specifications of QB-MINI2-EE

• Svhc: No SVHC (18-Jun-2010)
• Mcu Supported Families: MINICUBE2
• Silicon Family Name: V850, 78K0R, 78K0S
• Ic Product Type: On-Chip Debug Emulator
• Kit Contents: MINICUBE2, USB Cable, Target Cable, 78K0-OCD Board
• Features: On-Chip Debugging, Flash Memory Programming,

3.2.5 Securing of user resources and setting of security ID
32
•
implement each debug function. Refer to the descriptions on the following pages and set these items in the user
program or using the compiler options.
•
•
Internal ROM space
Internal ROM space
The shaded portions in Figure 3-12 are the areas reserved for placing the debug monitor program, so user
programs and data cannot be allocated in these spaces. These spaces must be secured so as not to be used
by the user program.
The user must prepare the following to perform communication between MINICUBE2 and the target device and
Securement of memory space
Securement of serial interface for communication
The register settings, concerning UART or CSI-H/S used for communication between MINICUBE2 and the
target device, performed by the debug monitor program must not be changed.
Security ID setting
The ID code must be embedded in the area filled with yellow (0x70 to 0x79) in Figure 3-12, to prevent the
memory from being read by an unauthorized person.
10 bytes
10 bytes
4 bytes
4 bytes
4 bytes
4 bytes
4 bytes
4 bytes
2 KB
2 KB
Figure 3-12. Memory Spaces Where Debug Monitor Programs Are Allocated
CHAPTER 3
Internal ROM end address
Internal ROM end address
CSI or UART receive interrupt vector
CSI or UART receive interrupt vector
0x70 (security ID area)
0x70 (security ID area)
0x60 (interrupt vector for debugging)
0x60 (interrupt vector for debugging)
0x0 (reset vector)
0x0 (reset vector)
HOW TO USE MINICUBE2 WITH V850 MICROCONTROLLER
User’s Manual U18371EJ1V0UM
Internal RAM space
Internal RAM space
10 to 16 bytes
10 to 16 bytes
: Debugging area
: Debugging area
Internal RAM end address
Internal RAM end address