CYIL1SE3000AA-GZDC Cypress Semiconductor Corp, CYIL1SE3000AA-GZDC Datasheet - Page 43

no-image

CYIL1SE3000AA-GZDC

Manufacturer Part Number
CYIL1SE3000AA-GZDC
Description
IC IMAGE SENSOR 3MP 369-PGA
Manufacturer
Cypress Semiconductor Corp
Datasheet

Specifications of CYIL1SE3000AA-GZDC

Lead Free Status / RoHS Status
Lead free / RoHS Compliant
If RESET_N_SEQ is only low for a short period of time (100 ns),
the pixel array is not completely reset. Information from the
previous integration cycle is still present on the photodiode.
Sequencer Reset
The sequencer is reset separately by bringing the RESET_N_SEQ register low. This causes an asynchronous reset of the sequencer.
The reset must have a length of at least 20 clock cycles (five words). Resetting the sequencer corrupts the analog voltages stored in
the pixel array. Therefore, a new readout sequence must start with an exposure first. After the reset, a readout sequence is reinitiated
by using EXPOSURE_1 pin. Ensure the reset of the pixel array is long enough (>= 3 µs).
Startup Sequence
To guarantee the correct startup of all the sensor modules,
perform the following startup sequence:
Document Number: 001-44335 Rev. *C
1. All supplies are powered on simultaneous, but the RESET_N
2. When all supplies are stable, bring RESET_N pin high. The
pin is kept low. The VAA is not powered on before VDD is
powered on.
sensor now begins to operate.
RESET_N_SEQ
RESET_N_SEQ
EXPOSURE_1
LVDS outputs
LVDS output
RESET_N
stable supply voltages
stable supply voltages
min 20 clk cycles
min 20 clk cycles
PRELIMINARY
Figure 32. Sequencer Reset
Figure 31. Reset on Startup
pix_reset
idle words
idle words
Ensure that the pixels are in reset for at least 3 µs by keeping
RESET_N_SEQ low for a long time, or by not starting exposure
before 3 µs after RESET_N_SEQ.
3. Set RESET_N_SEQ register bit to zero if other SPI registers
4. Set the RESET_N_SEQ bit to 1 if all required SPI registers
min 0.5us
need to be uploaded.
are changed. LUPA 3000 operates only in slave mode;
therefore, the sensor is now controlled through the
EXPOSURE_1 pin.
idle words
idle words
FOT+ROT
CYIL1SN3000AA
valid data
valid data
Page 43 of 61
[+] Feedback

Related parts for CYIL1SE3000AA-GZDC