CS1W-CRM21 Omron, CS1W-CRM21 Datasheet - Page 104

• Manufacturer Part Number: CS1W-CRM21
• Description: CS1 CompoNet Master
• Manufacturer: Omron

Specifications of CS1W-CRM21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2-2-2
2-12
Online Connection
Information
Window
Procedures
When Serial Connection Is Selected
When USB Connection Is Selected
1. Detection of the serial connection method will start and the Auto-Connecting Dialog
2. If automatic connection with the PLC is successful, the online status and information
(USB connection can be selected when connecting to a CJ2 CPU Unit, NSJ-series or
CP-series PLC.)
1. Detection of the selected connection method will start and the Auto-Connecting
2. If automatic connection with the Controller is successful, just as with serial
Box will be displayed.
on the target PLC will be displayed in the Online Connection Information Window.
Note 1: The device type information that was uploaded can be checked offline by clicking
Note 2: Once an automatic connection has been made, switching between offline and online
Note 3: When connecting online for the first time after opening a project, the target Unit will
Dialog Box will be displayed.
connection, the online status and information on the target Controller will be
displayed in the Online Connection Information Window.
Online displayed.
1. The Unit with the same network and node addresses.
2. When a routing table is set for the target PLC, the communicating Unit or port
is possible by clicking the
menu bar. If the network and node address settings for the relay PLC and the target
PLC are the same, the Unit that was connected immediately before will be auto-
matically connected again the next time online.
be determined in the following order.
the
with the lowest network address in the target networks.
icon or selecting Network - Communications Settings from the menu bar.
icon or selecting Network
Relay PLC’s model settings
in the computer
Target PLC information
Information on accessible
Communications Units and ports
in the target PLC
−
Work Online from the