CS1W-CRM21 Omron, CS1W-CRM21 Datasheet - Page 186

• Manufacturer Part Number: CS1W-CRM21
• Description: CS1 CompoNet Master
• Manufacturer: Omron

Specifications of CS1W-CRM21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3-2 Setting the Routing Tables
3-2-10 Transferring Routing Tables to a Network PLC through a Direct Serial Connection
3-30
Note
If routing tables were previously set in the target PLC, those tables will be overwritten
with the routing table that is being edited. Verify that the routing tables are being
written to the correct PLC.
Setting Example:
In this example, the tables are transferred to node address 2 in the Controller Link
network connected to the Controller Link Unit with unit number 1.
Make the settings in the Switching the target PLC Dialog Box, as shown in the
following diagram.
7. Select Options – Transfer to PLC.
8. The following dialog box will be displayed to confirm the transfer. Verify that it is all
9. The routing tables (local network table and relay network table) will be transferred
Computer (CX-Integrator)
right to proceed with the transfer to the PLC, click the Yes Button.
from the CX-Integrator to PLC2.
The following dialog box will be displayed after the transfer is completed.
Direct serial connection
• Controller Link or SYSMAC Link data link network:
• Ethernet or DeviceNet network
Connect online with
network address = 0, and
node address = 0.
The nodes connected to the network are listed in the pull-down list in the
Node Field. Select the destination node address from the pull-down list.
Specify the destination node’s node address directly in the Node Address
Field.
If a node address is specified and that node is connected even once, the
node will be added to the pull-down list in the Node Field the next time the
dialog box is opened.
Unit number 1:
Controller Link Unit
Select the Connect to the PLC
on the Network Option.
Select 01 Controller Link from
the pull-down list.
Select 2.
Node address 2
Controller Link
Transfer destination
is this PLC.