CS1W-CRM21 Omron, CS1W-CRM21 Datasheet - Page 67

• Manufacturer Part Number: CS1W-CRM21
• Description: CS1 CompoNet Master
• Manufacturer: Omron

Specifications of CS1W-CRM21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Relay PLC Communications Settings
Description:
Contents
Example
Example
Contents
Display item
Display item
Offline
Toolbus COM1, 19200,None8, 1 [CJM-CPU22]
The following network
types will be displayed for
the connection to the
relay PLC.
Toolbus (peripheral)
SYSMAC WAY (Host
Link)
SYSMAC LINK
Ethernet
Ethernet (FINS/TCP)
FinsGateway
Controller Link
Toolbus
[CS1H-CPU67H]
Relay PLC’s CPU Unit
model
7) Relay PLC’s CPU Unit
Updating the Online Connection Information Window Display
This section describes how to update the target PLC display in the Online Connection
Information Window display, and how to display the updated information.
Use the following procedure.
1) Network Type
!Caution When changing or removing a routing table (see note), be sure to update
1. In the Online Connection Information Window, either select Update of Online
model
Information Window from the View Menu or press the F5 Key.
the display for the Online Connection Information Window. The display
for the Online Connection Information Window could possibly be different
from the actual network status. If operations are executed without first
updating the display, particularly online operations in the Network Con-
figuration Window, it could cause data to be mistakenly read or written
for the wrong network or node address or unit number.
Note:
COM port on
computer
COM1,
Net (0)
For a direct serial connection, the FINS destination network and node addresses
are normally displayed as 0.
For direct network connections, any FINS destination network (1 to 127) and
node addresses can be set. (If routing tables are registered in the PLCs on the
networks, specifying a PLC on any network other than the network that is
directly connected to is also possible.
2) COM Port
Changing or removing a routing table refers to using the CX-Integrator
(or a CX-Integrator for another personal computer) to start the Routing
Table Component and then changing or removing a routing table for
the target PLC (either a local network table or a relay network table).
8) Relay PLC’s FINS destination
No.
network address (decimal)
Net (0), Node (0)
3) Baud Rate
(Displayed
only for
Toolbus or
SYSMAC
WAY)
Baud rate is
displayed in
bits/s.
19200,
1-5
(Displayed
only for
SYSMAC
WAY)
The
communica-
tions data
format parity
is displayed.
Even, Odd, or
None
None,
4) Parity
9) Relay PLC’s FINS destination node
8) Relay PlC’s FINS destination
7) Relay PLC’s CPU Unit model
6) Stop Bits
5) Data Bits
4) Parity
3) Baud Rate
2) COM Port No.
1) Network Type
address (decimal)
network address (decimal)
Node (0)
9) Relay PLC’s FINS destination
Window Descriptions
1-5-2
node address (decimal)
(Displayed
only for
SYSMAC
WAY)
7 or 8
8,
5) Data Bits
Main Window
(Displayed
only for
SYSMAC
WAY)
1 or 2
1
6) Stop Bits
1-39