CS1W-CRM21 Omron, CS1W-CRM21 Datasheet - Page 230

• Manufacturer Part Number: CS1W-CRM21
• Description: CS1 CompoNet Master
• Manufacturer: Omron

Specifications of CS1W-CRM21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4-3
4-3-11
4-38
Manually Setting Data Links
Transferring the Data Link Table
Changes in Transferring Data Link Tables during Data Link Operation
2. Confirm the data link mode settings according to the mode setting status in the
Nodes can be added while data links are running if the following Controller Link
Units/Boards and Repeater Units (CS1W-RPT01) are used (CX-Programmer version
3.2 or higher).
• CS1W-CLK21-V1
• CS1W-CLK12-V1
• CS1W-CLK52-V1
• CJ1W-CLK21-V1
Note: Refer to the Controller Link Operation Manual for the procedure to add nodes and details
Use the following procedure to transfer data link tables while data links are running.
1. Create the new data link tables offline and save them in a file.
2. Place the CX-Integrator online with the PLC.
3. Select Tools - Start Data Link from the menu bar. The Data Link Component will
4. Open the data link table file saved in step 1, above.
5. Select the node for which the data link table is to be changed.
6. Select Online - Transfer to PLC while datalink active from the menu bar. The
7. Click the Yes Button.
same way as previously described for transferring data links to all nodes on a
network.
be displayed.
following dialog box will be displayed.
The results of comparison will be displayed in the following dialog box.
Click the OK Button to check the differences. The differences between the data link
tables open in the CX-Integrator and the data link tables in the node to be changed
will be displayed.
Yes Button
No Button
on changing data link tables while data links are running.
The data link tables open on the CX-Integrator will be compared with
the data link tables in the node to be changed.
The data link tables will not be compared.
• 3G8F7-CLK21-V1(-EV1)
• 3G8F7-CLK12-V1(-EV1)
• 3G8F7-CLK52-V1(-EV1)