EP3C40F484C8N Altera, EP3C40F484C8N Datasheet - Page 126

• Manufacturer Part Number: EP3C40F484C8N
• Description: IC CYCLONE III FPGA 40K 484FBGA
• Manufacturer: Altera
• Series: Cyclone® IIIr

Specifications of EP3C40F484C8N

• Number Of Logic Elements/cells: 39600
• Number Of Labs/clbs: 2475
• Total Ram Bits: 1161216
• Number Of I /o: 331
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 484-FBGA
• Family Name: Cyclone III
• Number Of Logic Blocks/elements: 39600
• # I/os (max): 331
• Frequency (max): 402MHz
• Process Technology: 65nm
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 39600
• Ram Bits: 1161216
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 484
• Package Type: FBGA
• No. Of Logic Blocks: 2475
• Family Type: Cyclone III
• No. Of I/o's: 331
• I/o Supply Voltage: 3.3V
• Operating Frequency Max: 402MHz
• Operating Temperature Range: 0°C To +85°C
• Rohs Compliant: Yes
• For Use With: 544-2601 - KIT DEV CYCLONE III LS EP3CLS200544-2411 - KIT DEV NIOS II CYCLONE III ED.
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-2492

7–2
Figure 7–1. Cyclone III Device Family I/O Banks
Notes to
(1) The PCI-X I/O standard does not meet the IV curve requirement at the linear region.
(2) The RSDS, mini-LVDS, and PPDS I/O standards are only supported on output pins. These I/O standards are not supported on input pins.
(3) The LVPECL I/O standard is only supported on dedicated clock input pins. This I/O standard is not supported on output pins.
(4) The differential SSTL-2, SSTL-18, HSTL-18, HSTL-15, and HSTL-12 I/O standards are only supported on dedicated clock input pins and PLL
(5) BLVDS output uses two single-ended outputs with the second output programmed as inverted. BLVDS input uses LVDS input buffer.
Cyclone III Device Handbook, Volume 1
output clock pins. PLL output clock pins do not support Class II interface type of differential SSTL-18, HSTL-18, HSTL-15, and HSTL-12 I/O
standards.
Figure
7–1:
Figure 7–1
shows the I/O banks of the Cyclone III device family.
I/O Bank 8
I/O Bank 3
I/O banks 7 and 8 also support the
I/O banks 3 and 4 also support the
HSTL-12 Class II I/O standard
HSTL-12 Class II I/O standard
All I/O Banks Support:
3.3-V LVTTL/LVCMOS
3.0-V LVTTL/LVCMOS
2.5-V LVTTL/LVCMOS
1.8-V LVTTL/LVCMOS
1.5-V LVCMOS
1.2-V LVCMOS
3.0-V PCI/PCI-X (1)
LVDS
RSDS (2)
BLVDS (5)
mini-LVDS (2)
PPDS (2)
LVPECL (3)
SSTL-2 Class I and II
SSTL-18 Class I and II
HSTL-18 Class I and II
HSTL-15 Class I and II
HSTL-12 Class I
Differential SSTL-2 (4)
Differential SSTL-18 (4)
Differential HSTL-18 (4)
DIfferential HSTL-15 (4)
Differential HSTL-12 (4)
Chapter 7: High-Speed Differential Interfaces in the Cyclone III Device Family
I/O Bank 4
I/O Bank 7
© December 2009 Altera Corporation
High-Speed I/O Interface