DP83848TSQ/NOPB National Semiconductor, DP83848TSQ/NOPB Datasheet - Page 54

• Manufacturer Part Number: DP83848TSQ/NOPB
• Description: IC TXRX ETHERNET PHYTER 40-LLP
• Manufacturer: National Semiconductor
• Type: Transceiverr

Specifications of DP83848TSQ/NOPB

• Number Of Drivers/receivers: 1/1
• Protocol: Ethernet
• Voltage - Supply: 3 V ~ 3.6 V
• Mounting Type: Surface Mount
• Package / Case: 40-LLP
• Data Rate: 100Mbps
• Supply Voltage Range: 3V To 3.6V
• Logic Case Style: LLP
• No. Of Pins: 40
• Operating Temperature Range: -40°C To +85°C
• Msl: MSL 2 - 1 Year
• Filter Terminals: SMD
• Rohs Compliant: Yes
• Data Rate Max: 10Mbps
• Driver Case Style: LLP
• For Use With: DP83848T-MAU-EK - BOARD EVALUATION DP83848T
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DP83848TSQTR

www.national.com
7.2.7 PHY Control Register (PHYCR)
Bit
15
14
13
12
11
10
9
8
7
6
BIST_STATUS
BP_STRETCH
FORCE_MDIX
BIST_START
RESERVED
PAUSE_RX
PAUSE_TX
MDIX_EN
Bit Name
BIST_FE
PSR_15
Table 27. PHY Control Register (PHYCR), address 0x19
Strap, RW
0, RW/SC
0, LL/RO
Default
0, RW
0, RW
0, RW
0, RW
0, RO
0, RO
0
Auto-MDIX Enable:
1 = Enable Auto-neg Auto-MDIX capability.
0 = Disable Auto-neg Auto-MDIX capability.
The Auto-MDIX algorithm requires that the Auto-Negotiation En-
able bit in the BMCR register to be set. If Auto-Negotiation is not
enabled, Auto-MDIX should be disabled as well.
Force MDIX:
1 = Force MDI pairs to cross.
0 = Normal operation.
Pause Receive Negotiated:
Indicates that pause receive should be enabled in the MAC. Based
on ANAR[11:10] and ANLPAR[11:10] settings.
This function shall be enabled according to IEEE 802.3 Annex 28B
Table 28B-3, “Pause Resolution”, only if the Auto-Negotiated High-
est Common Denominator is a full duplex technology.
Pause Transmit Negotiated:
Indicates that pause transmit should be enabled in the MAC. Based
on ANAR[11:10] and ANLPAR[11:10] settings.
This function shall be enabled according to IEEE 802.3 Annex 28B
Table 28B-3, “Pause Resolution”, only if the Auto-Negotiated High-
est Common Denominator is a full duplex technology.
BIST Force Error:
1 = Force BIST Error.
0 = Normal operation.
This bit forces a single error, and is self clearing.
BIST Sequence select:
1 = PSR15 selected.
0 = PSR9 selected.
BIST Test Status:
1 = BIST pass.
0 = BIST fail. Latched, cleared when BIST is stopped.
For a count number of BIST errors, see the BIST Error Count in the
CDCTRL1 register.
BIST Start:
1 = BIST start.
0 = BIST stop.
Bypass LED Stretching:
This will bypass the LED stretching and the LED will reflect the in-
ternal value.
1 = Bypass LED stretching.
0 = Normal operation.
RESERVED: Must be zero.
(Receive on TPTD pair, Transmit on TPRD pair)
54
Description