PIC24F08KA102-E/ML Microchip Technology Inc., PIC24F08KA102-E/ML Datasheet - Page 148

• Manufacturer Part Number: PIC24F08KA102-E/ML
• Description: 8KB FLASH, 1.5KB RAM, 512B EEPROM, 16 MIPS, 24 I/O, 16-BIT PIC24F FAMILY, NANOWAT
• Manufacturer: Microchip Technology Inc.

Specifications of PIC24F08KA102-E/ML

• A/d Inputs: 9 Channel, 10-bit
• Comparators: 2
• Cpu Speed: 16 MIPS
• Eeprom Memory: 0 Bytes
• Input Output: 24
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 16
• Package Type: 28-pin QFN
• Programmable Memory: 8K Bytes
• Ram Size: 1.5K Bytes
• Speed: 32 MHz
• Temperature Range: –40 to 125 °C
• Timers: 3-16-bit
• Voltage, Range: 1.8-3.6 V
• Lead Free Status / Rohs Status: RoHS Compliant part

PIC24F16KA102 FAMILY
REGISTER 18-1:
DS39927B-page 146
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9-8
bit 7
bit 6
bit 5
bit 4
Note 1:
R/C-0, HC
UARTEN
WAKE
R/W-0
2:
This feature is only available for the 16x BRG mode (BRGH = 0).
Bit availability depends on pin availability.
UARTEN: UARTx Enable bit
1 = UARTx is enabled; all UARTx pins are controlled by UARTx as defined by UEN<1:0>
0 = UARTx is disabled; all UARTx pins are controlled by port latches; UARTx power consumption is
Unimplemented: Read as ‘0’
USIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
IREN: IrDA
1 = IrDA encoder and decoder enabled
0 = IrDA encoder and decoder disabled
RTSMD: Mode Selection for UxRTS Pin bit
1 = UxRTS pin in Simplex mode
0 = UxRTS pin in Flow Control mode
Unimplemented: Read as ‘0’
UEN<1:0>: UARTx Enable bits
11 = UxTX, UxRX and UxBCLK pins are enabled and used; UxCTS pin controlled by port latches
10 = UxTX, UxRX, UxCTS and UxRTS pins are enabled and used
01 = UxTX, UxRX and UxRTS pins are enabled and used; UxCTS pin controlled by port latches
00 = UxTX and UxRX pins are enabled and used; UxCTS and UxRTS/UxBCLK pins controlled by port
WAKE: Wake-up on Start Bit Detect During Sleep Mode Enable bit
1 = UARTx will continue to sample the UxRX pin; interrupt generated on falling edge, bit cleared in
0 = No wake-up enabled
LPBACK: UARTx Loopback Mode Select bit
1 = Enable Loopback mode
0 = Loopback mode is disabled
ABAUD: Auto-Baud Enable bit
1 = Enable baud rate measurement on the next character – requires reception of a Sync field (55h);
0 = Baud rate measurement disabled or completed
RXINV: Receive Polarity Inversion bit
1 = UxRX Idle state is ‘0’
0 = UxRX Idle state is ‘1’
LPBACK
R/W-0
minimal
hardware on following rising edge
cleared in hardware upon completion
U-0
—
latches
UxMODE: UARTx MODE REGISTER
®
Encoder and Decoder Enable bit
C = Clearable bit
W = Writable bit
‘1’ = Bit is set
R/W-0, HC
ABAUD
USIDL
R/W-0
(2)
IREN
RXINV
R/W-0
R/W-0
Preliminary
(1)
HC = Hardware Clearable bit
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
(1)
RTSMD
BRGH
R/W-0
R/W-0
PDSEL1
R/W-0
U-0
—
© 2009 Microchip Technology Inc.
x = Bit is unknown
PDSEL0
R/W-0
R/W-0
UEN1
(2)
R/W-0
STSEL
R/W-0
UEN0
(2)
bit 8
bit 0