PEB 20571 F V3.1 Infineon Technologies, PEB 20571 F V3.1 Datasheet - Page 57

• Manufacturer Part Number: PEB 20571 F V3.1
• Description: IC LINE CARD CTRLR DSP TQFP-100
• Manufacturer: Infineon Technologies

Specifications of PEB 20571 F V3.1

• Function: PBX Controller with DSP
• Interface: ISDN
• Voltage - Supply: 3.13 V ~ 3.47 V
• Current - Supply: 272.6mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFQFP
• Includes: Layer-1 Control, Signaling Control, Signal Processing, Voice Channel Handling
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Number Of Circuits: -
• Other names: PEB20571FV3.1X; PEB20571FV31XP; SP000007539

3
3.1
The DELIC provides the following system interfaces:
IOM-2000 Interface
A new serial layer 1 interface driving up to three VIP/ VIP8 (Versatile ISDN Port, PEB
20590/ PEB 20591). Each VIP provides eight 2B+D ISDN channels, which can be
programmed via IOM-2000 to S/T mode or U
IOM-2 (GCI) Interface
Two standard IOM-2 (GCI) ports with eight 2B+D ISDN channels each, at a data rate of
up to 2 x 2.048 Mbit/s. They can be combined to a 4.096 Mbit/s highway.
PCM Interface
Four standard Master/Slave PCM interfaces with up to 32 time slots each, at a data rate
of up to 4 x 2.048 Mbit/s. They can be combined to two 4.096 Mbit/s highways or one
8.192 Mbit/s highway. Additionally, 128 time slots of 256 time slots per 8 kHz frame can
be transmitted at a rate of 16.384 Mbit/s.
Serial Communication Interface (GHDLC)
An asynchronous serial port supporting HDLC formatted data frames at a data rate of up
to 8.192 Mbit/s.
Microprocessor Interface
A standard 8-bit multiplexed/de-multiplexed µP interface, compatible to Intel/Infineon
(e.g. 80386EX, C166) and Motorola (e.g. 68340, 801) bus systems. It includes two
separate mailboxes, one for normal data transfer, and one for fast DMA transfers.
JTAG Boundary Scan Test Interface
• DELIC provides a standard test interface according to IEEE 1149.1. The 4-bit TAP
• The JTAG pins TDI, TDO and JTCK may also be used as interface for DSP emulation.
Data Sheet
controller has an own reset input.
Interface Description
Overview of Interfaces
40
PN
mode.
Interface Description
PEB 20570
PEB 20571
2003-07-31