PEB 20571 F V3.1 Infineon Technologies, PEB 20571 F V3.1 Datasheet - Page 81

• Manufacturer Part Number: PEB 20571 F V3.1
• Description: IC LINE CARD CTRLR DSP TQFP-100
• Manufacturer: Infineon Technologies

Specifications of PEB 20571 F V3.1

• Function: PBX Controller with DSP
• Interface: ISDN
• Voltage - Supply: 3.13 V ~ 3.47 V
• Current - Supply: 272.6mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 100-LFQFP
• Includes: Layer-1 Control, Signaling Control, Signal Processing, Voice Channel Handling
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Number Of Circuits: -
• Other names: PEB20571FV3.1X; PEB20571FV31XP; SP000007539

3.4
The µP interface may be operated in different modes. This chapter describes how to
configure the DELIC to each mode.
3.4.1
The processor mode is selected by the MODE input pin of the DELIC. "Low" level selects
Infineon/ INTEL mode, "HIGH" level selects Motorola mode.
3.4.2
In both modes, the A-bus and the D-bus are used in parallel. The A-bus should be
connected to the 8 LSBs of AD-bus, coming from the µP, also in multiplexed mode. The
mode is determined according to the ALE input pin. When ALE is permanently driven to
‘1’, the DELIC works in de-multiplexed mode. Otherwise the DELIC works in multiplexed
mode.
The next figure describes the connection of the DELIC to the address and data buses in
the different modes.
Note: Motorola mode is used only with de-multiplexed AD bus. Intel/Infineon mode may
Data Sheet
be used with both, multiplexed or de-multiplexed AD bus.
µP Interface
Intel/Infineon or Motorola Mode
De-Multiplexed or Multiplexed Mode
64
Interface Description
PEB 20570
PEB 20571
2003-07-31