PEF 24470 H V1.3 Infineon Technologies, PEF 24470 H V1.3 Datasheet - Page 28

• Manufacturer Part Number: PEF 24470 H V1.3
• Description: IC MTSI-XL SWITCHING MQFP100
• Manufacturer: Infineon Technologies
• Series: SWITIr

Specifications of PEF 24470 H V1.3

• Function: Switching IC
• Interface: PCM, PLL
• Number Of Circuits: 1
• Voltage - Supply: 3.13 V ~ 3.47 V
• Current - Supply: 200mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-SQFP
• Includes: Clock Shift, Data Rate Adaption, Multipoint Switching
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Other names: PEF24470HV1.3X; SP000007617

PRELIMINARY
Figure 5
3.3.1.6
The message mode allows to send a predefined 8-bit data value in a defined time-slot
on a dedicated destination port. Message mode is started or stopped via register CCMD.
The data value to be send is predefined in register MV. The time-slot and the destination
port is is defined in register
3.3.2
The parallel mode can be set with the ’set parallel mode’ command in the configuration
command register. This command set the first 8 input lines and the first 8 output lines of
the local bus as parallel bus. If the parallel mode is enabled all included lines will be set
to 2.048 Mbit/s automatically. If the parallel mode is disabled all lines will keep the data
rate of 2.048 Mbit/s until a new data rate will be programmed for the selected line.
Preliminary Data Sheet
Message Mode
Parallel Mode for Local Bus
Port 0
Local Bus
Port 1
Local Bus
Port 0
Bidirectional Mode
Issued Command
SPA = 0
ITSA = A
DPA = 1
OTSA = 14
CCMD = 09
TS 10
TS 10
TS 20
OTSA
and register DPA.
Swap ITSA and OTSA
Swap SPA and DPA
minimum delay
19
PEF 20450 / 20470 / 24470
TS 10
TS 20
TS 20
Architectural Description
Internal
SPA = 1
ITSA = 14
DPA = 0
OTSA = A
switi_067.emf
Port 0
Port 1
Port 1
2001-11-20