SC28L201A1DGG,118 NXP Semiconductors, SC28L201A1DGG,118 Datasheet - Page 45

• Manufacturer Part Number: SC28L201A1DGG,118
• Description: IC UART W/FIFO 48-TSSOP
• Manufacturer: NXP Semiconductors
• Series: IMPACTr

Specifications of SC28L201A1DGG,118

• Features: False-start Bit Detection
• Number Of Channels: 2, DUART
• Fifo's: 256 Byte
• Voltage - Supply: 3.3V, 5V
• With Parallel Port: Yes
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 48-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935277824118; SC28L201A1DGG-T; SC28L201A1DGG-T

Philips Semiconductors
9397 750 13138
Product data sheet
Table 17:
Bit
4:3
2
1:0
Symbol
MR1 - Mode Register 1 (address 0x21) bit description
Description
Parity Mode Select
If ‘with parity’ or ‘force parity’ is selected, a parity bit is added to the
transmitted character and the receiver performs a parity check on incoming
data. MR1[4:3] = 11 selects the channel to operate in the special Wake-up
mode.
Parity Type Select
This bit sets the parity type (odd or even) if the ‘with parity’ mode is
programmed by MR1[4:3], and the polarity of the forced parity bit if the ‘force
parity mode is programmed it has no effect if the ‘no parity’ mode is
programmed. In the special ‘Wake-up’ mode, it selects the polarity of the A/D
bit. The parity bit is used to an address or data byte in the ‘Wake-up’ mode.
Bits per Character Select.
This field selects the number of data bits per character to be transmitted and
received. This number does not include the start, parity, or stop bits.
00 = with parity
01 = force parity
10 = no parity
11 = multi-drop Special Mode
0 = even
1 = odd
00 = 5 bits
01 = 6 bits
10 = 7 bits
11 = 8 bits
Rev. 01 — 31 October 2005
3.3 V, 5 V UART, 3.125 Mbit/s, with 256-byte FIFO
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
…continued
SC28L201
45 of 110