SC28L201A1DGG,118 NXP Semiconductors, SC28L201A1DGG,118 Datasheet - Page 63

• Manufacturer Part Number: SC28L201A1DGG,118
• Description: IC UART W/FIFO 48-TSSOP
• Manufacturer: NXP Semiconductors
• Series: IMPACTr

Specifications of SC28L201A1DGG,118

• Features: False-start Bit Detection
• Number Of Channels: 2, DUART
• Fifo's: 256 Byte
• Voltage - Supply: 3.3V, 5V
• With Parallel Port: Yes
• With Auto Flow Control: Yes
• With False Start Bit Detection: Yes
• With Modem Control: Yes
• With Cmos: Yes
• Mounting Type: Surface Mount
• Package / Case: 48-TSSOP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 935277824118; SC28L201A1DGG-T; SC28L201A1DGG-T

Philips Semiconductors
9397 750 13138
Product data sheet
8.3.5 Watchdog, Character, Address and X Enable Register (WCXER)
This register enables the UARTs Character Recognition, Address Recognition and
Receiver watchdog timer. If both enable and disable are active, a disable results. This
register is used to enable the general-purpose character recognition feature without
causing any Xon/Xoff or Wake-up mode activities to occur. The recognition event is
reported in the ISR register.
Table 37:
[1]
Bit
7
6
5
4
3
2
1
0
[1]
This bit control is duplicated at MR0[7].
Symbol
WCXER - Watchdog, Character, Address and X Enable Register (address 0x40) bit
description
Description
Watchdog enable.
Watchdog disable.
Address recognition disable.
Address recognition enable.
Xon recognition disable.
Xon recognition enable.
Xoff recognition disable.
Xoff recognition enable.
Rev. 01 — 31 October 2005
1 = disable watchdog
0 = no action
1 = enable watchdog
0 = no action
1 = disable Address recognition
0 = no action
1 = enable Address recognition
0 = no action
1 = disable Xon
0 = no action
1 = enable Xon
0 = no action
1 = disable Xoff
0 = no action
1 = enable Xoff
0 = no action
3.3 V, 5 V UART, 3.125 Mbit/s, with 256-byte FIFO
© Koninklijke Philips Electronics N.V. 2005. All rights reserved.
SC28L201
63 of 110